Hi,
On 08-03-15 10:04, Ian Campbell wrote:
On Sat, 2015-03-07 at 15:04 +0100, Hans de Goede wrote:
Fix a type in board/sunxi/Kconfig which caused VIDEO_LCD_PANEL_I2C to be
"typo"
Heh, so I made a typo in the word typo, fixed :)
+#define CONFIG_VIDEO_LCD_I2C_BUS 1 /* NA, but necessary to compile */
Hrm, should the usage sites not be either ifdef'd or excluded at the
Makefile level when VIDEO_LCD_PANEL_I2C is disabled?
The only use is in
if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
unsigned int orig_i2c_bus = i2c_get_bus_num();
i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS);
i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */
i2c_set_bus_num(orig_i2c_bus);
}
Is the issue that the IS_ENABLED statically false but the compiler still
wants the contents to be valid?
Right.
How about a helper set_video_i2c_bus or some such which can be a nop if
CONFIG_VIDEO_LCD_I2C_BUS is not defined, which would keep the ifdef out
of this code?
Not a fan of that, the whole purpose of using IS_ENABLED is to have easier
to read code, I do not believe that adding a wrapper helps there.
Or at least #define it to some obviously bogus value (e.g. ~0UL).
That is a good idea, I've changed it to -1 in my personal tree.
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
