Intel Quark SoC integrates two 10/100 ethernet controllers which can
be connected to an external RMII PHY. The MAC IP is from Designware.
Enable this support with the existing U-Boot Designware MAC driver
so that the ethernet port on Intel Galileo board can be used.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
arch/x86/cpu/quark/quark.c | 19 +++++++++++++++++++
include/configs/galileo.h | 5 +++++
2 files changed, 24 insertions(+)
diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index dccf7ac..25edcf7 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -6,6 +6,8 @@
#include <common.h>
#include <mmc.h>
+#include <netdev.h>
+#include <phy.h>
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/post.h>
@@ -116,3 +118,20 @@ int cpu_mmc_init(bd_t *bis)
return pci_mmc_init("Quark SDHCI", mmc_supported,
ARRAY_SIZE(mmc_supported));
}
+
+int cpu_eth_init(bd_t *bis)
+{
+ u32 base;
+ int ret0, ret1;
+
+ pci_read_config_dword(QUARK_EMAC0, PCI_BASE_ADDRESS_0, &base);
+ ret0 = designware_initialize(base, PHY_INTERFACE_MODE_RMII);
+
+ pci_read_config_dword(QUARK_EMAC1, PCI_BASE_ADDRESS_0, &base);
+ ret1 = designware_initialize(base, PHY_INTERFACE_MODE_RMII);
+
+ if (ret0 < 0 && ret1 < 0)
+ return -1;
+ else
+ return 0;
+}
diff --git a/include/configs/galileo.h b/include/configs/galileo.h
index d745f4e..65a2c3e 100644
--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@@ -57,4 +57,9 @@
#define CONFIG_MMC_SDMA
#define CONFIG_CMD_MMC
+/* 10/100M Ethernet support */
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_ALTDESCRIPTOR
+#define CONFIG_PHYLIB
+
#endif /* __CONFIG_H */
--
1.8.2.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
