Le Thu, 12 Mar 2015 16:48:43 +0100, "Albert ARIBAUD (3ADEV)" <albert.arib...@3adev.fr> a écrit :
> The controller's Reed-Solomon ECC hardware is > used except of course for raw reads and writes. > It covers in- and out-of-band data together. > > The SPL framework is supported. > > Signed-off-by: Albert ARIBAUD (3ADEV) <albert.arib...@3adev.fr> > --- > > Changes in v4: > - remove two debugging statements > - add __iomem to regs struct > - remove useless 'else return;' > - take BB marker out of free OOB area > - replace magic numbers in OOB reads/writes > - add timeouts in NAND loops > - use DIV_ROUND_UP where applicable > - fix erroneous comment > - skip bad blocks in SPL chainload loop > [...] > +int board_nand_init(struct nand_chip *nand) Drat. Missed the bit about CONFIG_SYS_NAND_SELF_INIT. Will fix in v5 tomorrow. Cordialement, Albert ARIBAUD 3ADEV _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
