> -----Original Message----- > From: Kushwaha Prabhakar-B32579 > Sent: Wednesday, March 11, 2015 8:12 PM > To: Zhao Qiang-B45475; u-boot@lists.denx.de; Sun York-R58495 > Cc: Zhao Qiang-B45475 > Subject: RE: [U-Boot] [PATCH v2] T2080QDS/PCIe: Soft Reset PCIe for down- > training issue > > Hi Zhao, > > > > -----Original Message----- > > From: U-Boot [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Zhao > > Qiang > > Sent: Wednesday, March 11, 2015 2:42 PM > > To: u-boot@lists.denx.de; Sun York-R58495 > > Cc: Zhao Qiang-B45475 > > Subject: [U-Boot] [PATCH v2] T2080QDS/PCIe: Soft Reset PCIe for > > down-training issue > > > > T2080QDS PEX1/Slot#1 will down-train from x4 to x2, Soft reset PCIe > > can fix this issue, this is a workaround. > > > > Signed-off-by: Zhao Qiang <b45...@freescale.com> > > --- > > changes for v2 > > - modify the commit message > > > > drivers/pci/fsl_pci_init.c | 17 +++++++++++++++++ > > include/configs/T208xQDS.h > > | 1 + > > 2 files changed, 18 insertions(+) > > > > diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c > > index 231b075..327fa7d 100644 > > --- a/drivers/pci/fsl_pci_init.c > > +++ b/drivers/pci/fsl_pci_init.c > > @@ -481,6 +481,23 @@ void fsl_pci_init(struct pci_controller *hose, > > struct fsl_pci_info *pci_info) #endif > > } > > > > +#ifdef CONFIG_FSL_PCIE_T2080QDS_RESET > > + int i; > > + /* assert PCIe reset */ > > + setbits_be32(&pci->pdb_stat, 0x08000000); > > + (void) in_be32(&pci->pdb_stat); > > + udelay(1000); > > + /* clear PCIe reset */ > > + clrbits_be32(&pci->pdb_stat, 0x08000000); > > + asm("sync;isync"); > > + for (i = 0; i < 100 && ltssm < PCI_LTSSM_L0; i++) { > > + pci_hose_read_config_word(hose, dev, PCI_LTSSM, > > + <ssm); > > + udelay(1000); > > + } > > + > > +#endif > > + > > #ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003 > > if (enabled == 0) { > > serdes_corenet_t *srds_regs = (void > > *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; > > diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h > > index > > 395472b..851b4f9 100644 > > --- a/include/configs/T208xQDS.h > > +++ b/include/configs/T208xQDS.h > > @@ -558,6 +558,7 @@ unsigned long get_board_ddr_clk(void); > > #define CONFIG_PCIE2 /* PCIE controler 2 */ > > #define CONFIG_PCIE3 /* PCIE controler 3 */ > > #define CONFIG_PCIE4 /* PCIE controler 4 */ > > +#define CONFIG_FSL_PCIE_T2080QDS_RESET > > do we really require this new define? > > Can we not manage with CONFIG_FSL_PCIE_RESET?
I read and test the code again, I think it is necessary for a new define. > > -prabhakar _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
