- Fastboot is enable by default for DRA7XX - This is based on following patch modified accordingly http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=b2e04f92b5d91c708b6fd6b79d2266966ac51f4b
Signed-off-by: Angela Stegmaier <angelaba...@ti.com> Signed-off-by: Dileep Katta <dileep.ka...@linaro.org> --- Changes in v2: - Merged the header file content to existing dra7xx_evm.h to avoid duplication - Removed unnecessary definitions as per comments Changes in v3: - Added the changes on dwc3_gadget developer branch of DFU tree - Added the changes as part of existing dra7xx_evm_defconfig - Enabled fastboot by default - Kept fastboot aware VID/PID only - reverted change made for U-Boot offset include/configs/dra7xx_evm.h | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index e94b618..7acd907 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -84,6 +84,14 @@ DFU_ALT_INFO_EMMC \ DFU_ALT_INFO_RAM +/* Fastboot */ +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x2F000000 +#define CONFIG_FASTBOOT_FLASH +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 + #include <configs/ti_omap5_common.h> /* Enhance our eMMC support / experience. */ @@ -181,8 +189,8 @@ #define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" -#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_G_DNL_VENDOR_NUM 0x0451 +#define CONFIG_G_DNL_PRODUCT_NUM 0xd022 #define CONFIG_USB_GADGET_DUALSPEED /* USB Device Firmware Update support */ -- 1.8.3.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot