On Tuesday, March 24, 2015 at 06:01:01 AM, Stephen Warren wrote: > When I created wait_for_chhltd(), I noticed that some instances of the > code it replaced expected the ACK bit to be set and others didn't. I > assumed this was an accidental inconsistency in the code, so wrote > wait_for_chhltd() to always expect ACK to be set. This code appeared to > work correctly for both enumeration of USB keyboards and operation of > USB Ethernet devices. However, this change broke USB Mass Storage (at > least my USB SD card reader). This change reverts to exactly the > original behaviour. I'm not sure why the ACK bit isn't always set > (perhaps a quirk in the USB HW or DWC2 controller), but the code works > this way! > > Fixes: 5be4ca7d6ac8 ("usb: dwc2: unify waiting for transfer completion") > Signed-off-by: Stephen Warren <swar...@wwwdotorg.org>
Applied to topic/dwc2 , which will go to -next. Thanks! Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot