Hi Marcin,
On 27.03.2015 13:59, Marcin Krzemiński wrote:
I want to test some UBI fs behavior in U-Boot using qemu and vexpress_ca9x4
board ( U-Boot 2015.1)
To tst UBI I added lines to vexpress_ca9x4.h:
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_MTD_PARTITIONS /* needed for UBI */
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=flash0-0"
#define MTDPARTS_DEFAULT "mtdparts=flash0-0:1m(empty),10m(ubi),-(rest)"
#define CONFIG_LZO /* needed for UBI */
#define CONFIG_RBTREE /* needed for UBI */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_FIT
also I've changed malloc pool size to 512kB in vexpress_common.h:
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024)
Without looking deeper into your mail, I would recommend to increase the
malloc size to at least 2MiB and test again.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot