All the UniPhier boards have switch to Driver Model.
"select DM" is better than default value in each defconfig.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
arch/arm/Kconfig | 3 +++
configs/ph1_ld4_defconfig | 3 ---
configs/ph1_pro4_defconfig | 3 ---
configs/ph1_sld8_defconfig | 3 ---
4 files changed, 3 insertions(+), 9 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3a86df0..2d583c9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -748,6 +748,9 @@ config ARCH_UNIPHIER
select SUPPORT_SPL
select SPL
select OF_CONTROL
+ select DM
+ select DM_SERIAL
+ select DM_I2C
endchoice
diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig
index aa1805b..036e2d1 100644
--- a/configs/ph1_ld4_defconfig
+++ b/configs/ph1_ld4_defconfig
@@ -1,9 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
-CONFIG_DM=y
-CONFIG_DM_SERIAL=y
CONFIG_SPL_DM=y
-CONFIG_DM_I2C=y
CONFIG_MACH_PH1_LD4=y
CONFIG_PFC_MICRO_SUPPORT_CARD=y
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-ld4-ref"
diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig
index 194f7a5..9a010ee 100644
--- a/configs/ph1_pro4_defconfig
+++ b/configs/ph1_pro4_defconfig
@@ -1,9 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
-CONFIG_DM=y
-CONFIG_DM_SERIAL=y
CONFIG_SPL_DM=y
-CONFIG_DM_I2C=y
CONFIG_MACH_PH1_PRO4=y
CONFIG_PFC_MICRO_SUPPORT_CARD=y
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-pro4-ref"
diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig
index e7e7fff..29fe0e8 100644
--- a/configs/ph1_sld8_defconfig
+++ b/configs/ph1_sld8_defconfig
@@ -1,9 +1,6 @@
CONFIG_ARM=y
CONFIG_ARCH_UNIPHIER=y
-CONFIG_DM=y
-CONFIG_DM_SERIAL=y
CONFIG_SPL_DM=y
-CONFIG_DM_I2C=y
CONFIG_MACH_PH1_SLD8=y
CONFIG_PFC_MICRO_SUPPORT_CARD=y
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ph1-sld8-ref"
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
