On 03/31/2015 08:45 AM, Stephen Warren wrote: > On 03/31/2015 06:02 AM, Masahiro Yamada wrote: >> Since the Kconfig conversion, some developers have reported that >> Kbuild sometimes fails completely at random. According to the error >> reports, it seems to occur for any target board, but only on very >> fast computers. >> >> The log message for the fail case is like this: >> >> make[1]: *** No rule to make target `../arch//cpu/u-boot.lds', >> needed by `u-boot.lds'. Stop. >> >> It looks like the top config.mk has not been included for *some* >> reason, and $(ARCH) has been left blank. >> >> I suspect "autoconf_is_current" is not working in some situation. >> >> This commit moves the definition of ARCH, CPU, SOC, etc. to the >> top Makefile, so they are surely set. > > This doesn't solve the issue for me, although it improves the chance of > success and changes the error I get. > > With and without this patch, I ran: > > CROSS_COMPILE=arm-linux-gnueabi- ./MAKEALL rpi_2 > > ... until whichever of success/fail had the fewest "hits" had at least 5 > "hits". > > Without this patch, the build failed 6 out of 11 runs with: >
Stephen is so fast, saved me time to setup and test. Let me know if I need to run test from my side. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot