Hi Masahiro and all,

On 25/03/2015 04:20, Masahiro Yamada wrote:
Hi Angelo,


2015-03-17 15:55 GMT+09:00 Angelo Dureghello <ang...@sysam.it>:
On 17/03/2015 04:35, Masahiro Yamada wrote:

All the M68000 boards have switched to Generic Board.
This file is no longer necessary.


Hi Masahiro,

thanks.

Afaik, me and Alison converted and tested actually only 2 boards
(adding #define CONFIG_SYS_GENERIC_BOARD inside /include/configs/...)

Is this a problem ?  Afaik, the user going to build the board
will get a warning that he needs to switch to generic board.
So the same user will be the tester that all works. Correct ?

As a rule of generic board, people are supposed to do run-test
and then send a patch.


BTW, M68K is the last architecture that adopts per-board linker script.

M68K should switch to per-soc linker scripts like the other architecures.
It means all the followings should be merged into the single linker script
arch/m68k/cpu/u-boot.lds.

board/freescale/m52277evb/u-boot.lds
board/freescale/m5235evb/u-boot.lds
board/cobra5272/u-boot.lds
board/BuS/eb_cpu5282/u-boot.lds
board/freescale/m5208evbe/u-boot.lds
board/freescale/m5249evb/u-boot.lds
board/freescale/m5253demo/u-boot.lds
board/freescale/m5272c3/u-boot.lds
board/freescale/m5275evb/u-boot.lds
board/freescale/m5282evb/u-boot.lds
board/sysam/amcore/u-boot.lds
board/astro/mcf5373l/u-boot.lds
board/freescale/m53017evb/u-boot.lds
board/freescale/m5329evb/u-boot.lds
board/freescale/m5373evb/u-boot.lds
board/freescale/m54418twr/u-boot.lds
board/freescale/m54451evb/u-boot.lds
board/freescale/m54455evb/u-boot.lds
board/freescale/m547xevb/u-boot.lds
board/freescale/m548xevb/u-boot.lds



Is this possible for you?  (or for someone else?)

If there is no volunteer, it would be much easier to remove all the M68K boards
except the two you and Alison can maintain.

Maintain or Remove!


so i posted a patch for a unified m68k arch-wide linker script.
Could not be the best solution but it is a solution that works.

https://patchwork.ozlabs.org/patch/455952/

Let me know your comments.


Best regards,
Angelo Dureghello
--


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to