Certain older kernels in use by some customers erroneously define a uart3 for GW54xx with a pinmux that conflicts with NAND. This will remove that node to avoid such conflicts.
Signed-off-by: Tim Harvey <thar...@gateworks.com> --- board/gateworks/gw_ventana/gw_ventana.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 068c726..06611b5 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1599,6 +1599,17 @@ int ft_board_setup(void *blob, bd_t *bd) strlen((const char *)info->model) + 1); /* + * disable serial2 node for GW54xx for compatibility with older + * 3.10.x kernel that improperly had this node enabled in the DT + */ + if (board_type == GW54xx) { + i = fdt_path_offset(blob, + "/soc/aips-bus@02100000/serial@021ec000"); + if (i) + fdt_del_node(blob, i); + } + + /* * disable wdog1/wdog2 nodes for GW51xx below revC to work around * errata causing wdog timer to be unreliable. */ -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot