Move the code that sets up the device with a new address into its own
function, usb_prepare_device().
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v3:
- Fix polarity of CONFIG_XHCI check (which broke USB keyboards)
common/usb.c | 72 +++++++++++++++++++++++++++++++++++-------------------------
1 file changed, 42 insertions(+), 30 deletions(-)
diff --git a/common/usb.c b/common/usb.c
index e5df98f..f249acf 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -956,19 +956,10 @@ static int usb_setup_descriptor(struct usb_device *dev,
bool do_read)
return 0;
}
-/*
- * By the time we get here, the device has gotten a new device ID
- * and is in the default state. We need to identify the thing and
- * get the ball rolling..
- *
- * Returns 0 for success, != 0 for error.
- */
-int usb_new_device(struct usb_device *dev)
+static int usb_prepare_device(struct usb_device *dev, int addr, bool do_read,
+ struct usb_device *parent, int portnr)
{
- bool do_read = true;
- int addr, err;
- int tmp;
- ALLOC_CACHE_ALIGN_BUFFER(unsigned char, tmpbuf, USB_BUFSIZ);
+ int err;
/*
* Allocate usb 3.0 device context.
@@ -976,28 +967,15 @@ int usb_new_device(struct usb_device *dev)
* and related data structures first. This call does that.
* Refer to sec 4.3.2 in xHCI spec rev1.0
*/
- if (usb_alloc_device(dev)) {
+ err = usb_alloc_device(dev);
+ if (err) {
printf("Cannot allocate device context to get SLOT_ID\n");
- return -1;
+ return err;
}
-
- /* We still haven't set the Address yet */
- addr = dev->devnum;
- dev->devnum = 0;
-
- /*
- * XHCI needs to issue a Address device command to setup
- * proper device context structures, before it can interact
- * with the device. So a get_descriptor will fail before any
- * of that is done for XHCI unlike EHCI.
- */
-#ifdef CONFIG_USB_XHCI
- do_read = false;
-#endif
err = usb_setup_descriptor(dev, do_read);
if (err)
return err;
- err = usb_legacy_port_reset(dev->parent, dev->portnr);
+ err = usb_legacy_port_reset(parent, portnr);
if (err)
return err;
@@ -1008,11 +986,45 @@ int usb_new_device(struct usb_device *dev)
if (err < 0) {
printf("\n USB device not accepting new address " \
"(error=%lX)\n", dev->status);
- return 1;
+ return err;
}
mdelay(10); /* Let the SET_ADDRESS settle */
+ return 0;
+}
+
+/*
+ * By the time we get here, the device has gotten a new device ID
+ * and is in the default state. We need to identify the thing and
+ * get the ball rolling..
+ *
+ * Returns 0 for success, != 0 for error.
+ */
+int usb_new_device(struct usb_device *dev)
+{
+ bool do_read = true;
+ int addr, err;
+ int tmp, ret;
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, tmpbuf, USB_BUFSIZ);
+
+ /* We still haven't set the Address yet */
+ addr = dev->devnum;
+ dev->devnum = 0;
+
+ /*
+ * XHCI needs to issue a Address device command to setup
+ * proper device context structures, before it can interact
+ * with the device. So a get_descriptor will fail before any
+ * of that is done for XHCI unlike EHCI.
+ */
+#ifdef CONFIG_USB_XHCI
+ do_read = false;
+#endif
+ ret = usb_prepare_device(dev, addr, do_read, dev->parent, dev->portnr);
+ if (ret)
+ return ret;
+
tmp = sizeof(dev->descriptor);
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
--
2.2.0.rc0.207.ga3a616c
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
