We have understood what Scott was suggesting but still need to try the changes suggested by him. We haven't started on it yet.
Regards, Aneesh Bansal > -----Original Message----- > From: Sun York-R58495 > Sent: Monday, April 13, 2015 10:03 PM > To: Bansal Aneesh-B39320; u-boot@lists.denx.de > Cc: Wood Scott-B07421; Gupta Ruchika-R66431 > Subject: Re: [PATCH 1/2][v6] powerpc/mpc85xx: SECURE BOOT- NAND secure > boot target for P3041 > > Aneesh, > > On 03/04/2015 11:38 PM, Aneesh Bansal wrote: > > Secure Boot Target is added for NAND for P3041. > > Changes: > > In PowerPC, the core begins execution from address 0xFFFFFFFC. > > In case of secure boot, this default address maps to Boot ROM. > > The Boot ROM code requires that the bootloader(U-boot) must lie in 0 > > to 3.5G address space i.e. 0x0 - 0xDFFFFFFF. > > > > In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is > > configured as SRAM. U-Boot binary will be located on this SRAM at > > location 0xBFF40000 with entry point as 0xBFFFFFFC. > > > > Signed-off-by: Ruchika Gupta <ruchika.gu...@freescale.com> > > Signed-off-by: Aneesh Bansal <aneesh.ban...@freescale.com> > > --- > > Changes in v6: > > Changed the version in Patchset. > > > > Are we closed on this patch discussion? I see open discussion for v4 patch > after you > posted v6. > > York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot