With FIT boot, U-boot puts a device tree and an initramdisk at the
tail of the memory.
Some UniPhier boards have a large amount of memory. For those
boards, a device tree and an initramdisk are located out of reach of
the Linux kernel causing a kernel panic if CONFIG_VMSPLIT_3G is
defined in the kernel side.
Add initrd_high and fdt_high to prevent them from going too high.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
include/configs/uniphier.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index d4688c5..dea340f 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -236,6 +236,8 @@
"netdev=eth0\0" \
"image_offset=0x00080000\0" \
"image_size=0x00f00000\0" \
+ "initrd_high=0xa0000000\0" \
+ "fdt_high=0xa0000000\0" \
"verify=n\0" \
"nandupdate=nand erase 0 0x100000 &&" \
"tftpboot u-boot-spl.bin &&" \
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
