Hi Simon, Thanks for the update and I will be glad to help with testing if needed.
Tom -----Original Message----- From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass Sent: Sunday, April 26, 2015 8:36 PM To: Beaman, Thomas Cc: u-boot@lists.denx.de; Bin Meng; gabriel huau Subject: Re: MinnowBoard Max uboot Hi Thomas, On 12 March 2015 at 16:20, Simon Glass <s...@chromium.org> wrote: > Hi Thomas, > > On 11 March 2015 at 05:06, Beaman, Thomas <thomas.bea...@xerox.com> wrote: >> Thank you, can you keep me updated if possible. > > OK I'll see if I can copy you on the patches. I got back into this last week and hope to have something to send to this in the next week or so. Regards, Simon >> >> Tom >> >> -----Original Message----- >> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon Glass >> Sent: Tuesday, March 10, 2015 1:21 PM >> To: Beaman, Thomas >> Cc: u-boot@lists.denx.de; Bin Meng; gabriel huau >> Subject: Re: MinnowBoard Max uboot >> >> Hi Tom, >> >> On 10 March 2015 at 05:24, Beaman, Thomas <thomas.bea...@xerox.com> wrote: >>> Hi Simon, >>> >>> Do you know what will be the timeframe of when someone may be able >>> to look at this in more detail. I will be able to help test any >>> updates if needed >>> >> >> I will take a look once I have things lined up for the next release, likely >> mid April. >> >> Regards, >> Simon >> >>> Thanks, >>> Tom >>> >>> -----Original Message----- >>> From: s...@google.com [mailto:s...@google.com] On Behalf Of Simon >>> Glass >>> Sent: Monday, March 09, 2015 11:49 AM >>> To: Beaman, Thomas >>> Cc: u-boot@lists.denx.de; Bin Meng; gabriel huau >>> Subject: Re: MinnowBoard Max uboot >>> >>> +Bin and Gabriel >>> >>> Hi Tom, >>> >>> On 9 March 2015 at 08:08, Beaman, Thomas <thomas.bea...@xerox.com> wrote: >>>> >>>> >>>> Hi Simon, >>>> >>>> >>>> >>>> I see you have put support for the MinnowBoard Max in the u-boot mainline. >>>> Thanks this is a very useful addition. I have been able to follow >>>> your readme and build a working bare metal uboot. Using the built >>>> uboot I can load and bring up a Linux Kernel. >>>> >>>> >>>> >>>> What I noticed from the running kernel is that only one of the two >>>> cores on the E3825 is running. In the power PC uboots I usually see >>>> a section for the multiple cores in the .dts file. My questions is >>>> how do I get both CPUs running on this board. Is it a uboot .dts >>>> file setup that will enable this, or is something in the kernel start up >>>> that does this. >>>> >>>> >>>> >>>> As a test I boot the same kernel using the EFI BIOS on the minnow >>>> board and both CPUs are running. >>>> >>>> >>>> >>>> Any suggestions or comments you have would be welcomed. >>>> >>>> >>> >>> My guess is that the LAPIC CPU start-up is missing. It isn't 100% clear >>> what the FSP does and does not do, but perhaps it does not do that. >>> >>> I did make something of a start on this with ivybridge but it isn't >>> complete, and it seems to be needed here. >>> >>> Regards, >>> Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot