On Tue, Apr 28, 2015 at 6:39 PM, Tom Rini <tr...@konsulko.com> wrote:
> On Tue, Apr 28, 2015 at 12:20:46PM -0300, Fabio Estevam wrote: > > On Tue, Apr 28, 2015 at 12:11 PM, Fabio Estevam <feste...@gmail.com> > wrote: > > > Hi Tom, > > > > > > On Tue, Apr 28, 2015 at 11:48 AM, Tom Rini <tr...@konsulko.com> wrote: > > > > > >> Since we have FEC do we really need to add ASIX as well? Also, what > > > > > > I can remove it if needed. Just kept the same as done in the > Solidrun's U-boot. > > > > > >> devices did you test this with for USB? I grabbed a Sandisk USB drive > > >> and on the i2eX I have, the bottom USB port doesn't see it and on the > > >> top I get: > > >> scanning bus 1 for devices... failed to set default configuration len > 0, > > >> status 80000000 > > > > > > I tested with USB pen drive and USB keyboard and it could recognize > them. > > > > > > Only the bottom top works for me and the same is seen on Solidrun's > U-boot. > > > > Ops, I mean "Only the bottom USB port works for me". > > How many USB pen drives do you have handy? I confirmed that my > keyboards don't work on my Allwinner board (A20 OLinuXino Lime2) but the > pen drive does (scanned, loaded and crc32'd a file). I'll try and do > the same test on my Sabrelite shortly. > Is CONFIG_SYS_USB_EVENT_POLL defined in the config? I found that without that usb input was not reliable. Even with it enabled some wireless keyboards behaved poorly. -Jon > > -- > Tom > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot