On Wed, Apr 29, 2015 at 3:02 PM, Vagrant Cascadian <vagr...@aikidev.net> wrote: > On 2015-04-27, Fabio Estevam wrote: >> Add HDMI output using PLL5 as the source for the IPU DI clocks, >> and accurate VESA timings. >> >> These settings are based on the patch from Soeren Moch <sm...@web.de> >> submitted for the tbs2910 mx6 based board. >> >> It allows the display to work properly at 1024x768@60. >> >> This should make the hdmi output signal compatible with most if not all >> modern displays. > > I wasn't able to test this as the HDMI TV I'm using doesn't support this > resolution (it is admittedly ~9 years old, the closest resolution it > does support is 1280x720@60). How complicated would it be to support > multiple resolutions?
(Sorry about the double post.. gmail..) There's edid support in the sunxi_display driver: http://git.denx.de/?p=u-boot.git;a=blob;f=drivers/video/sunxi_display.c;hb=HEAD#l188 Could pull it out as a share it. Regards, -- Robert Nelson https://rcn-ee.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot