Hi Bin,

On 5 May 2015 at 09:24, Bin Meng <bmeng...@gmail.com> wrote:
> This commit introduces the initial U-Boot support for QEMU x86 targets.
> U-Boot can boot from coreboot as a payload, or directly without coreboot.
>
> Signed-off-by: Bin Meng <bmeng...@gmail.com>
> ---
>
>  arch/x86/Kconfig                      |  5 +++
>  arch/x86/cpu/Makefile                 |  1 +
>  arch/x86/cpu/qemu/Kconfig             | 21 +++++++++++++
>  arch/x86/cpu/qemu/Makefile            |  8 +++++
>  arch/x86/cpu/qemu/car.S               | 26 ++++++++++++++++
>  arch/x86/cpu/qemu/dram.c              | 46 ++++++++++++++++++++++++++++
>  arch/x86/cpu/qemu/pci.c               | 49 ++++++++++++++++++++++++++++++
>  arch/x86/cpu/qemu/qemu.c              | 37 +++++++++++++++++++++++
>  arch/x86/dts/Makefile                 |  3 +-
>  arch/x86/dts/qemu-x86.dts             | 34 +++++++++++++++++++++
>  arch/x86/include/asm/arch-qemu/gpio.h | 13 ++++++++
>  arch/x86/include/asm/arch-qemu/qemu.h | 17 +++++++++++
>  board/emulation/Kconfig               | 25 +++++++++++++++
>  board/emulation/qemu-x86/Kconfig      | 24 +++++++++++++++
>  board/emulation/qemu-x86/MAINTAINERS  |  6 ++++
>  board/emulation/qemu-x86/Makefile     |  7 +++++
>  board/emulation/qemu-x86/qemu-x86.c   | 13 ++++++++
>  board/emulation/qemu-x86/start.S      |  9 ++++++
>  configs/qemu-x86_defconfig            |  6 ++++
>  include/configs/qemu-x86.h            | 57 
> +++++++++++++++++++++++++++++++++++
>  20 files changed, 406 insertions(+), 1 deletion(-)
>  create mode 100644 arch/x86/cpu/qemu/Kconfig
>  create mode 100644 arch/x86/cpu/qemu/Makefile
>  create mode 100644 arch/x86/cpu/qemu/car.S
>  create mode 100644 arch/x86/cpu/qemu/dram.c
>  create mode 100644 arch/x86/cpu/qemu/pci.c
>  create mode 100644 arch/x86/cpu/qemu/qemu.c
>  create mode 100644 arch/x86/dts/qemu-x86.dts
>  create mode 100644 arch/x86/include/asm/arch-qemu/gpio.h
>  create mode 100644 arch/x86/include/asm/arch-qemu/qemu.h
>  create mode 100644 board/emulation/Kconfig
>  create mode 100644 board/emulation/qemu-x86/Kconfig
>  create mode 100644 board/emulation/qemu-x86/MAINTAINERS
>  create mode 100644 board/emulation/qemu-x86/Makefile
>  create mode 100644 board/emulation/qemu-x86/qemu-x86.c
>  create mode 100644 board/emulation/qemu-x86/start.S
>  create mode 100644 configs/qemu-x86_defconfig
>  create mode 100644 include/configs/qemu-x86.h

Acked-by: Simon Glass <s...@chromium.org>
Tested-by: Simon Glass <s...@chromium.org>

Bin this is a great addition, thanks for putting this together!

What is involved in getting graphics to work? BTW did you ever get
graphics running on your board?

Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to