Hi Przemyslaw,

On 8 May 2015 at 10:20, Przemyslaw Marczak <p.marc...@samsung.com> wrote:
> This commit adds emulation of sandbox PMIC device, which includes:
> - PMIC I2C emulation driver
> - PMIC I/O driver (UCLASS_PMIC)
> - PMIC regulator driver (UCLASS_REGULATOR)
>
> The sandbox PMIC has 12 significant registers and 4 as padding to 16 bytes,
> which allows using 'i2c md' command with the default count (16).
>
> The sandbox PMIC provides regulators:
> - 2x BUCK
> - 2x LDO
>
> Each, with adjustable output:
> - Enable state
> - Voltage
> - Current limit (LDO1/BUCK1 only)
> - Operation mode (different for BUCK and LDO)
>
> Each attribute has it's own register, beside the enable state, which depends
> on operation mode.
>
> The header file: sandbox_pmic.h includes PMIC's default register values,
> which are set on i2c pmic emul driver's probe() method.
>
> Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
> ---
>  doc/device-tree-bindings/pmic/sandbox.txt      |  35 +++
>  doc/device-tree-bindings/regulator/sandbox.txt |  45 ++++
>  drivers/power/pmic/Kconfig                     |  25 ++
>  drivers/power/pmic/Makefile                    |   3 +-
>  drivers/power/pmic/i2c_pmic_emul.c             | 145 ++++++++++
>  drivers/power/pmic/sandbox.c                   |  79 ++++++
>  drivers/power/regulator/Kconfig                |  30 +++
>  drivers/power/regulator/Makefile               |   1 +
>  drivers/power/regulator/sandbox.c              | 355 
> +++++++++++++++++++++++++
>  include/power/sandbox_pmic.h                   | 189 +++++++++++++
>  10 files changed, 906 insertions(+), 1 deletion(-)
>  create mode 100644 doc/device-tree-bindings/pmic/sandbox.txt
>  create mode 100644 doc/device-tree-bindings/regulator/sandbox.txt
>  create mode 100644 drivers/power/pmic/i2c_pmic_emul.c
>  create mode 100644 drivers/power/pmic/sandbox.c
>  create mode 100644 drivers/power/regulator/sandbox.c
>  create mode 100644 include/power/sandbox_pmic.h

Acked-by: Simon Glass <s...@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <s...@chromium.org>

I expected i2c_pmic_emul to get its settings from the device tree too
- is that not possible for some reason?

Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to