The file test.dts from driver model test directory,
was compiled by call dtc in script: test/dm/test-dm.sh.
This doesn't allow for including of dtsi files and using
of C preprocessor routines in this dts file.
Since the mentioned script builds U-Boot before tests,
then moving the test.dts file into sandbox dts directory
is reasonable.
Signed-off-by: Przemyslaw Marczak <p.marc...@samsung.com>
Acked-by: Simon Glass <s...@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <s...@chromium.org>
---
Changes V2:
- new commit
---
arch/sandbox/dts/Makefile | 1 +
arch/sandbox/dts/test.dts | 230 ++++++++++++++++++++++++++++++++++++++++++++++
test/dm/.gitignore | 1 -
test/dm/test-dm.sh | 3 +-
test/dm/test-main.c | 3 +-
test/dm/test.dts | 230 ----------------------------------------------
6 files changed, 233 insertions(+), 235 deletions(-)
create mode 100644 arch/sandbox/dts/test.dts
delete mode 100644 test/dm/.gitignore
delete mode 100644 test/dm/test.dts
diff --git a/arch/sandbox/dts/Makefile b/arch/sandbox/dts/Makefile
index a4c980b..562a078 100644
--- a/arch/sandbox/dts/Makefile
+++ b/arch/sandbox/dts/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_SANDBOX) += sandbox.dtb
+dtb-$(CONFIG_DM_TEST) += test.dtb
targets += $(dtb-y)
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
new file mode 100644
index 0000000..d0c40be
--- /dev/null
+++ b/arch/sandbox/dts/test.dts
@@ -0,0 +1,230 @@
+/dts-v1/;
+
+/ {
+ model = "sandbox";
+ compatible = "sandbox";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ aliases {
+ console = &uart0;
+ i2c0 = "/i2c@0";
+ spi0 = "/spi@0";
+ pci0 = &pci;
+ testfdt6 = "/e-test";
+ testbus3 = "/some-bus";
+ testfdt0 = "/some-bus/c-test@0";
+ testfdt1 = "/some-bus/c-test@1";
+ testfdt3 = "/b-test";
+ testfdt5 = "/some-bus/c-test@5";
+ testfdt8 = "/a-test";
+ eth0 = "/eth@10002000";
+ eth5 = ð_5;
+ usb0 = &usb_0;
+ usb1 = &usb_1;
+ usb2 = &usb_2;
+ };
+
+ uart0: serial {
+ compatible = "sandbox,serial";
+ u-boot,dm-pre-reloc;
+ };
+
+ a-test {
+ reg = <0>;
+ compatible = "denx,u-boot-fdt-test";
+ ping-expect = <0>;
+ ping-add = <0>;
+ u-boot,dm-pre-reloc;
+ test-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 5 0 3 2 1>,
+ <0>, <&gpio_a 12>;
+ test2-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 6 1 3 2 1>,
+ <&gpio_b 7 2 3 2 1>, <&gpio_b 8 4 3 2 1>,
+ <&gpio_b 9 0xc 3 2 1>;
+ };
+
+ junk {
+ reg = <1>;
+ compatible = "not,compatible";
+ };
+
+ no-compatible {
+ reg = <2>;
+ };
+
+ b-test {
+ reg = <3>;
+ compatible = "denx,u-boot-fdt-test";
+ ping-expect = <3>;
+ ping-add = <3>;
+ };
+
+ some-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "denx,u-boot-test-bus";
+ reg = <3>;
+ ping-expect = <4>;
+ ping-add = <4>;
+ c-test@5 {
+ compatible = "denx,u-boot-fdt-test";
+ reg = <5>;
+ ping-expect = <5>;
+ ping-add = <5>;
+ };
+ c-test@0 {
+ compatible = "denx,u-boot-fdt-test";
+ reg = <0>;
+ ping-expect = <6>;
+ ping-add = <6>;
+ };
+ c-test@1 {
+ compatible = "denx,u-boot-fdt-test";
+ reg = <1>;
+ ping-expect = <7>;
+ ping-add = <7>;
+ };
+ };
+
+ d-test {
+ reg = <3>;
+ ping-expect = <6>;
+ ping-add = <6>;
+ compatible = "google,another-fdt-test";
+ };
+
+ e-test {
+ reg = <3>;
+ ping-expect = <6>;
+ ping-add = <6>;
+ compatible = "google,another-fdt-test";
+ };
+
+ f-test {
+ compatible = "denx,u-boot-fdt-test";
+ };
+
+ g-test {
+ compatible = "denx,u-boot-fdt-test";
+ };
+
+ gpio_a: base-gpios {
+ compatible = "sandbox,gpio";
+ gpio-controller;
+ #gpio-cells = <1>;
+ gpio-bank-name = "a";
+ num-gpios = <20>;
+ };
+
+ gpio_b: extra-gpios {
+ compatible = "sandbox,gpio";
+ gpio-controller;
+ #gpio-cells = <5>;
+ gpio-bank-name = "b";
+ num-gpios = <10>;
+ };
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "sandbox,i2c";
+ clock-frequency = <100000>;
+ eeprom@2c {
+ reg = <0x2c>;
+ compatible = "i2c-eeprom";
+ emul {
+ compatible = "sandbox,i2c-eeprom";
+ sandbox,filename = "i2c.bin";
+ sandbox,size = <256>;
+ };
+ };
+ };
+
+ pci: pci-controller {
+ compatible = "sandbox,pci";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000
+ 0x01000000 0 0x20000000 0x20000000 0 0x2000>;
+ pci@1f,0 {
+ compatible = "pci-generic";
+ reg = <0xf800 0 0 0 0>;
+ emul@1f,0 {
+ compatible = "sandbox,swap-case";
+ };
+ };
+ };
+
+ spi@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "sandbox,spi";
+ cs-gpios = <0>, <&gpio_a 0>;
+ spi.bin@0 {
+ reg = <0>;
+ compatible = "spansion,m25p16", "spi-flash";
+ spi-max-frequency = <40000000>;
+ sandbox,filename = "spi.bin";
+ };
+ };
+
+ eth@10002000 {
+ compatible = "sandbox,eth";
+ reg = <0x10002000 0x1000>;
+ fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x00>;
+ };
+
+ eth_5: eth@10003000 {
+ compatible = "sandbox,eth";
+ reg = <0x10003000 0x1000>;
+ fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x11>;
+ };
+
+ eth@10004000 {
+ compatible = "sandbox,eth";
+ reg = <0x10004000 0x1000>;
+ fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x22>;
+ };
+
+ usb_0: usb@0 {
+ compatible = "sandbox,usb";
+ status = "disabled";
+ hub {
+ compatible = "sandbox,usb-hub";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ flash-stick {
+ reg = <0>;
+ compatible = "sandbox,usb-flash";
+ };
+ };
+ };
+
+ usb_1: usb@1 {
+ compatible = "sandbox,usb";
+ hub {
+ compatible = "usb-hub";
+ usb,device-class = <9>;
+ hub-emul {
+ compatible = "sandbox,usb-hub";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ flash-stick {
+ reg = <0>;
+ compatible = "sandbox,usb-flash";
+ sandbox,filepath = "testflash.bin";
+ };
+
+ };
+ };
+ };
+
+ usb_2: usb@2 {
+ compatible = "sandbox,usb";
+ status = "disabled";
+ };
+
+};
diff --git a/test/dm/.gitignore b/test/dm/.gitignore
deleted file mode 100644
index b741b8a..0000000
--- a/test/dm/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/test.dtb
diff --git a/test/dm/test-dm.sh b/test/dm/test-dm.sh
index 6158f68..5c47ffd 100755
--- a/test/dm/test-dm.sh
+++ b/test/dm/test-dm.sh
@@ -6,12 +6,11 @@ die() {
}
NUM_CPUS=$(cat /proc/cpuinfo |grep -c processor)
-dtc -I dts -O dtb test/dm/test.dts -o test/dm/test.dtb
make O=sandbox sandbox_config || die "Cannot configure U-Boot"
make O=sandbox -s -j${NUM_CPUS} || die "Cannot build U-Boot"
dd if=/dev/zero of=spi.bin bs=1M count=2
echo -n "this is a test" > testflash.bin
dd if=/dev/zero bs=1M count=4 >>testflash.bin
-./sandbox/u-boot -d test/dm/test.dtb -c "dm test"
+./sandbox/u-boot -d ./sandbox/arch/sandbox/dts/test.dtb -c "dm test"
rm spi.bin
rm testflash.bin
diff --git a/test/dm/test-main.c b/test/dm/test-main.c
index a47bb37..7348f69 100644
--- a/test/dm/test-main.c
+++ b/test/dm/test-main.c
@@ -78,8 +78,7 @@ int dm_test_main(const char *test_name)
*/
if (!gd->fdt_blob || fdt_next_node(gd->fdt_blob, 0, NULL) < 0) {
puts("Please run with test device tree:\n"
- " dtc -I dts -O dtb test/dm/test.dts -o
test/dm/test.dtb\n"
- " ./u-boot -d test/dm/test.dtb\n");
+ " ./u-boot -d arch/sandbox/dts/test.dtb\n");
ut_assert(gd->fdt_blob);
}
diff --git a/test/dm/test.dts b/test/dm/test.dts
deleted file mode 100644
index d0c40be..0000000
--- a/test/dm/test.dts
+++ /dev/null
@@ -1,230 +0,0 @@
-/dts-v1/;
-
-/ {
- model = "sandbox";
- compatible = "sandbox";
- #address-cells = <1>;
- #size-cells = <0>;
-
- aliases {
- console = &uart0;
- i2c0 = "/i2c@0";
- spi0 = "/spi@0";
- pci0 = &pci;
- testfdt6 = "/e-test";
- testbus3 = "/some-bus";
- testfdt0 = "/some-bus/c-test@0";
- testfdt1 = "/some-bus/c-test@1";
- testfdt3 = "/b-test";
- testfdt5 = "/some-bus/c-test@5";
- testfdt8 = "/a-test";
- eth0 = "/eth@10002000";
- eth5 = ð_5;
- usb0 = &usb_0;
- usb1 = &usb_1;
- usb2 = &usb_2;
- };
-
- uart0: serial {
- compatible = "sandbox,serial";
- u-boot,dm-pre-reloc;
- };
-
- a-test {
- reg = <0>;
- compatible = "denx,u-boot-fdt-test";
- ping-expect = <0>;
- ping-add = <0>;
- u-boot,dm-pre-reloc;
- test-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 5 0 3 2 1>,
- <0>, <&gpio_a 12>;
- test2-gpios = <&gpio_a 1>, <&gpio_a 4>, <&gpio_b 6 1 3 2 1>,
- <&gpio_b 7 2 3 2 1>, <&gpio_b 8 4 3 2 1>,
- <&gpio_b 9 0xc 3 2 1>;
- };
-
- junk {
- reg = <1>;
- compatible = "not,compatible";
- };
-
- no-compatible {
- reg = <2>;
- };
-
- b-test {
- reg = <3>;
- compatible = "denx,u-boot-fdt-test";
- ping-expect = <3>;
- ping-add = <3>;
- };
-
- some-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "denx,u-boot-test-bus";
- reg = <3>;
- ping-expect = <4>;
- ping-add = <4>;
- c-test@5 {
- compatible = "denx,u-boot-fdt-test";
- reg = <5>;
- ping-expect = <5>;
- ping-add = <5>;
- };
- c-test@0 {
- compatible = "denx,u-boot-fdt-test";
- reg = <0>;
- ping-expect = <6>;
- ping-add = <6>;
- };
- c-test@1 {
- compatible = "denx,u-boot-fdt-test";
- reg = <1>;
- ping-expect = <7>;
- ping-add = <7>;
- };
- };
-
- d-test {
- reg = <3>;
- ping-expect = <6>;
- ping-add = <6>;
- compatible = "google,another-fdt-test";
- };
-
- e-test {
- reg = <3>;
- ping-expect = <6>;
- ping-add = <6>;
- compatible = "google,another-fdt-test";
- };
-
- f-test {
- compatible = "denx,u-boot-fdt-test";
- };
-
- g-test {
- compatible = "denx,u-boot-fdt-test";
- };
-
- gpio_a: base-gpios {
- compatible = "sandbox,gpio";
- gpio-controller;
- #gpio-cells = <1>;
- gpio-bank-name = "a";
- num-gpios = <20>;
- };
-
- gpio_b: extra-gpios {
- compatible = "sandbox,gpio";
- gpio-controller;
- #gpio-cells = <5>;
- gpio-bank-name = "b";
- num-gpios = <10>;
- };
-
- i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- compatible = "sandbox,i2c";
- clock-frequency = <100000>;
- eeprom@2c {
- reg = <0x2c>;
- compatible = "i2c-eeprom";
- emul {
- compatible = "sandbox,i2c-eeprom";
- sandbox,filename = "i2c.bin";
- sandbox,size = <256>;
- };
- };
- };
-
- pci: pci-controller {
- compatible = "sandbox,pci";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x02000000 0 0x10000000 0x10000000 0 0x2000
- 0x01000000 0 0x20000000 0x20000000 0 0x2000>;
- pci@1f,0 {
- compatible = "pci-generic";
- reg = <0xf800 0 0 0 0>;
- emul@1f,0 {
- compatible = "sandbox,swap-case";
- };
- };
- };
-
- spi@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- compatible = "sandbox,spi";
- cs-gpios = <0>, <&gpio_a 0>;
- spi.bin@0 {
- reg = <0>;
- compatible = "spansion,m25p16", "spi-flash";
- spi-max-frequency = <40000000>;
- sandbox,filename = "spi.bin";
- };
- };
-
- eth@10002000 {
- compatible = "sandbox,eth";
- reg = <0x10002000 0x1000>;
- fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x00>;
- };
-
- eth_5: eth@10003000 {
- compatible = "sandbox,eth";
- reg = <0x10003000 0x1000>;
- fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x11>;
- };
-
- eth@10004000 {
- compatible = "sandbox,eth";
- reg = <0x10004000 0x1000>;
- fake-host-hwaddr = <0x00 0x00 0x66 0x44 0x22 0x22>;
- };
-
- usb_0: usb@0 {
- compatible = "sandbox,usb";
- status = "disabled";
- hub {
- compatible = "sandbox,usb-hub";
- #address-cells = <1>;
- #size-cells = <0>;
- flash-stick {
- reg = <0>;
- compatible = "sandbox,usb-flash";
- };
- };
- };
-
- usb_1: usb@1 {
- compatible = "sandbox,usb";
- hub {
- compatible = "usb-hub";
- usb,device-class = <9>;
- hub-emul {
- compatible = "sandbox,usb-hub";
- #address-cells = <1>;
- #size-cells = <0>;
- flash-stick {
- reg = <0>;
- compatible = "sandbox,usb-flash";
- sandbox,filepath = "testflash.bin";
- };
-
- };
- };
- };
-
- usb_2: usb@2 {
- compatible = "sandbox,usb";
- status = "disabled";
- };
-
-};
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
