Haikun, On 05/18/2015 06:24 AM, Haikun Wang wrote: > Enable Driver Model SPI for ls1021aqds board. > DSPI and QSPI is enabled only when boot from QSPI. > DSPI and QSPI are compatible under Driver Model SPI. > > Signed-off-by: Haikun Wang <haikun.w...@freescale.com> > --- > Changes in v3: > - Remove CONFIG_SPI_FLASH_ATMEL > - IS_ENABLED(CONFIG_XXX) is only work with configure option in Kconfig, > and DM core code use IS_ENABLED(), so configure option in head file > can't work, so remove CONFIG_OF_CONTROL CONFIG_OF_SEPARATE CONFIG_DM > CONFIG_DM_SPI > > Changes in v2: > - Move all changes inside of CONFIG_QSPI_BOOT > > Changes in v1: None > include/configs/ls1021aqds.h | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-)
I lost track of your patch set. You have v3 3/4 and v3 4/4. Where are the first two patches in this set? The subject arm:ls102xa is not too bad. For future patches, I prefer the subject to be <arch>/<soc>, or <arch>/<board>. This one should have arm/ls1021aqds, or armv7/ls1021aqds. It helps maintainers to delegate the patches to custodians. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot