Hi Gabriel, I have two patches in patchwork:
http://patchwork.ozlabs.org/patch/471146/ http://patchwork.ozlabs.org/patch/471147/ Are they the correct ones? Also do you know how to use the gpio command to toggle a bin on the Minnowboard MAX header? I'd like to try that. Regards, Simon On 12 May 2015 at 00:20, gabriel huau <cont...@huau-gabriel.fr> wrote: > Please ignore this email/patch, I put the wrong message id ... > > > On 05/11/2015 11:12 PM, Gabriel Huau wrote: >> >> Signed-off-by: Gabriel Huau <cont...@huau-gabriel.fr> >> Acked-by: Simon Glass <s...@chromium.org> >> >> --- >> >> Changes in v3: >> - Rebase to the origin/master >> >> Changes in v2: >> - Fix ordering of include header >> >> board/intel/minnowmax/minnowmax.c | 9 +++++++++ >> include/configs/minnowmax.h | 1 + >> 2 files changed, 10 insertions(+) >> >> diff --git a/board/intel/minnowmax/minnowmax.c >> b/board/intel/minnowmax/minnowmax.c >> index 1f5549a..383cae0 100644 >> --- a/board/intel/minnowmax/minnowmax.c >> +++ b/board/intel/minnowmax/minnowmax.c >> @@ -5,6 +5,7 @@ >> */ >> #include <common.h> >> +#include <asm/gpio.h> >> #include <asm/ibmpc.h> >> #include <asm/pnp_def.h> >> #include <netdev.h> >> @@ -12,6 +13,14 @@ >> #define SERIAL_DEV PNP_DEV(0x2e, 4) >> +int arch_early_init_r(void) >> +{ >> + /* do the pin-muxing */ >> + gpio_ich6_pinctrl_init(); >> + >> + return 0; >> +} >> + >> int board_early_init_f(void) >> { >> lpc47m_enable_serial(SERIAL_DEV, UART0_BASE, UART0_IRQ); >> diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h >> index eb35a50..547765d 100644 >> --- a/include/configs/minnowmax.h >> +++ b/include/configs/minnowmax.h >> @@ -15,6 +15,7 @@ >> #define CONFIG_SYS_MONITOR_LEN (1 << 20) >> #define CONFIG_BOARD_EARLY_INIT_F >> +#define CONFIG_ARCH_EARLY_INIT_R >> #define CONFIG_X86_SERIAL >> #define CONFIG_SMSC_LPC47M > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot