Stefano,
As far as I can see, there are only two boards : gw_ventana and tbs2910.
CONFIG_DISPLAY_BOARDINFO_LATE enables show_board_info(), and this is not
weak, printing twice if we have both CONFIG_DISPLAY_BOARDINFO_LATE and
CONFIG_DISPLAY_BOARDINFO. I would suggest that we add
#undef CONFIG_DISPLAY_BOARDINFO
#define CONFIG_DISPLAY_BOARDINFO_LATE
to gw_ventana.h and tbs2910.h after applying this series.
It is unfortunate that there is no CONFIG_DISPLAY_CPUINFO_LATE.
The real solution would be to print both board and cpu info
after enabling the HDMI frame buffer. BOARDINFO_LATE alone
is not that important. So I agree to apply this patch series
without another fix.
Maybe we should add
#ifndef CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_DISPLAY_BOARDINFO
#endif
to mx6_common.h later. There are already other conditional defines
in there, and that could save the #undef in individual board files.
I will add a PRE_CONSOLE_BUFFER to tbs2910.h , so there is no
need anymore to add CONFIG_DISPLAY_BOARDINFO_LATE.
I'm fine with the merged consolidation series, no further action required
on this topic from my side.
Regards,
Soeren
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
