Am 11.06.2015 um 22:13 schrieb Jakub Kiciński:
On Thu, 11 Jun 2015 21:49:57 +0200, Johann Obermayr wrote:
Hello,
Hi there,
for raspberyy pi there are some "features" available.
dtoverlay, dtparam, ...
we have a Freescale mx6 CPU.
How we can add/enable this features ?
I'm new to U-Boot but on RPi the "features" are provided by their
proprietary firmware/bootloader. AFAIK U-Boot doesn't support DT
overlays.
Kuba
Thank you for this information.
Is there a way to change a loaded devicetree configuration ?
Because we have many boards with small differents. but less memory on disk.
at this time one DTB file need ~150kb. we have 1MB free, but we have >
20 different boards and
every month 1 or 2 new boards.
regards
Johann
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot