Now that SPL boot devices are clearly defined, we can use BOOT_DEVICE_QSPI_4
instead of a hardcoded value.
Signed-off-by: Paul Kocialkowski <cont...@paulk.fr>
---
arch/arm/cpu/armv7/omap-common/boot-common.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c
b/arch/arm/cpu/armv7/omap-common/boot-common.c
index d7e2e59..38fa640 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -48,14 +48,14 @@ void save_omap_boot_params(void)
if (boot_device == BOOT_DEVICE_NAND_I2C)
boot_device = BOOT_DEVICE_NAND;
#endif
-#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+#ifdef BOOT_DEVICE_QSPI_4
/*
* We get different values for QSPI_1 and QSPI_4 being used, but
* don't actually care about this difference. Rather than
* mangle the later code, if we're coming in as QSPI_4 just
* change to the QSPI_1 value.
*/
- if (boot_device == 11)
+ if (boot_device == BOOT_DEVICE_QSPI_4)
boot_device = BOOT_DEVICE_SPI;
#endif
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
