It is a common requirement to update some PMIC registers. Provide some
simple convenience functions to do this.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v3: None
Changes in v2: None
drivers/power/pmic/pmic-uclass.c | 32 ++++++++++++++++++++++++++++++++
include/power/pmic.h | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 66 insertions(+)
diff --git a/drivers/power/pmic/pmic-uclass.c b/drivers/power/pmic/pmic-uclass.c
index 40b5135..dbab3e3 100644
--- a/drivers/power/pmic/pmic-uclass.c
+++ b/drivers/power/pmic/pmic-uclass.c
@@ -139,6 +139,38 @@ int pmic_write(struct udevice *dev, uint reg, const
uint8_t *buffer, int len)
return ops->write(dev, reg, buffer, len);
}
+int pmic_reg_read(struct udevice *dev, uint reg)
+{
+ u8 byte;
+ int ret;
+
+ ret = pmic_read(dev, reg, &byte, 1);
+ debug("%s: reg=%x, value=%x\n", __func__, reg, byte);
+
+ return ret ? ret : byte;
+}
+
+int pmic_reg_write(struct udevice *dev, uint reg, uint value)
+{
+ u8 byte = value;
+
+ debug("%s: reg=%x, value=%x\n", __func__, reg, value);
+ return pmic_read(dev, reg, &byte, 1);
+}
+
+int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set)
+{
+ u8 byte;
+ int ret;
+
+ ret = pmic_reg_read(dev, reg);
+ if (ret < 0)
+ return ret;
+ byte = (ret & ~clr) | set;
+
+ return pmic_reg_write(dev, reg, byte);
+}
+
UCLASS_DRIVER(pmic) = {
.id = UCLASS_PMIC,
.name = "pmic",
diff --git a/include/power/pmic.h b/include/power/pmic.h
index eb152ef..6ba4b6e 100644
--- a/include/power/pmic.h
+++ b/include/power/pmic.h
@@ -264,6 +264,40 @@ int pmic_reg_count(struct udevice *dev);
*/
int pmic_read(struct udevice *dev, uint reg, uint8_t *buffer, int len);
int pmic_write(struct udevice *dev, uint reg, const uint8_t *buffer, int len);
+
+/**
+ * pmic_reg_read() - read a PMIC register value
+ *
+ * @dev: PMIC device to read
+ * @reg: Register to read
+ * @return value read on success or negative value of errno.
+ */
+int pmic_reg_read(struct udevice *dev, uint reg);
+
+/**
+ * pmic_reg_write() - write a PMIC register value
+ *
+ * @dev: PMIC device to write
+ * @reg: Register to write
+ * @value: Value to write
+ * @return 0 on success or negative value of errno.
+ */
+int pmic_reg_write(struct udevice *dev, uint reg, uint value);
+
+/**
+ * pmic_clrsetbits() - clear and set bits in a PMIC register
+ *
+ * This reads a register, optionally clears some bits, optionally sets some
+ * bits, then writes the register.
+ *
+ * @dev: PMIC device to update
+ * @reg: Register to update
+ * @clr: Bit mask to clear (set those bits that you want cleared)
+ * @set: Bit mask to set (set those bits that you want set)
+ * @return 0 on success or negative value of errno.
+ */
+int pmic_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set);
+
#endif /* CONFIG_DM_PMIC */
#ifdef CONFIG_POWER
--
2.4.3.573.g4eafbef
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
