Hi, On Wed, Jun 24, 2015 at 8:28 AM, Simon Glass <s...@chromium.org> wrote: > Since much of the code is generic, this also supports the Radxa Rock Pro. > Since there is no device tree available for that yet, it uses the same > config and device tree as the Firefly. This works because not all > peripherals are supported, so the differences don't matter.
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/rk3188-radxarock.dts this should be ok for all Radxa Rock(1) boards. > Support for booting from USB OTG is also provided, using the on-chip boot > ROM and the rkflashtool utility. This can boot as far as SPL, but there is > no support for reading U-Boot proper from USB as yet. This requires > implementing a suitable protocol (perhaps DFU or Rockchip's proprietary > one) in SPL. https://github.com/linux-rockchip/rkflashtool/commit/6da95a860e856e559310a6d96830eb687c23a132 "rkflashtool L" doesn't work after running your SPL code? I thought(just imagined, no confirmation) mask rom does the work after DRAM is initialized. > There is a large amount of additional work to bring other Rockchip drivers > and features into mainline U-Boot, so this is only a start. this is great start! :) Best Regards, _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
