remove options defined in the distro defaults add distro bot commands set scriptaddr value
Signed-off-by: Dennis Gilmore <den...@ausil.us> --- include/configs/vexpress_common.h | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 0c1da01..bed8ffd 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -123,7 +123,6 @@ #define CONFIG_SYS_L2CACHE_OFF 1 #define CONFIG_INITRD_TAG 1 #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_OF_LIBFDT 1 /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) @@ -152,18 +151,6 @@ #define CONFIG_SYS_SERIAL0 V2M_UART0 #define CONFIG_SYS_SERIAL1 V2M_UART1 -/* Command line configuration */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PXE -#define CONFIG_MENU -#define CONFIG_CMD_ELF -#define CONFIG_CMD_ENV -#define CONFIG_CMD_PING -#define CONFIG_CMD_BOOTZ -#define CONFIG_SUPPORT_RAW_INITRD - -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION 1 #define CONFIG_MMC 1 #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC @@ -177,8 +164,6 @@ #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_PXE -#define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000) @@ -200,9 +185,22 @@ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_CMD_ECHO + +#include <config_distro_defaults.h> /* Basic environment settings */ -#define CONFIG_BOOTCOMMAND "run bootflash;" +#define CONFIG_BOOTCOMMAND \ + "run distro_bootcmd; " \ + "run bootflash; " + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> + #ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP #define CONFIG_PLATFORM_ENV_SETTINGS \ "loadaddr=0x80008000\0" \ @@ -211,6 +209,7 @@ "ramdisk_addr=0x44800000\0" \ "maxramdisk=0x1800000\0" \ "pxefile_addr_r=0x88000000\0" \ + "scriptaddr=0x88000000\0" \ "kernel_addr_r=0x80008000\0" #elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP) #define CONFIG_PLATFORM_ENV_SETTINGS \ @@ -220,10 +219,12 @@ "ramdisk_addr=0x0c800000\0" \ "maxramdisk=0x1800000\0" \ "pxefile_addr_r=0xa8000000\0" \ + "scriptaddr=0xa8000000\0" \ "kernel_addr_r=0xa0008000\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_PLATFORM_ENV_SETTINGS \ + BOOTENV \ "console=ttyAMA0,38400n8\0" \ "dram=1024M\0" \ "root=/dev/sda1 rw\0" \ @@ -287,7 +288,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING 1 #define CONFIG_SYS_MAXARGS 16 /* max command args */ #endif /* VEXPRESS_COMMON_H */ -- 2.4.3 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot