The lpc32xx_eth_phylib_init() function is capable to connect LPC32XX MAC to some specified phy by phy id, by chance the single user of lpc32xx_eth has CONFIG_PHY_ADDR set to 0, however other boards may have non-zero CONFIG_PHY_ADDR value, fix it.
Signed-off-by: Vladimir Zapolskiy <[email protected]> --- drivers/net/lpc32xx_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/lpc32xx_eth.c b/drivers/net/lpc32xx_eth.c index 72451a9..6033392 100644 --- a/drivers/net/lpc32xx_eth.c +++ b/drivers/net/lpc32xx_eth.c @@ -630,7 +630,7 @@ int lpc32xx_eth_initialize(bd_t *bis) eth_register(dev); #if defined(CONFIG_PHYLIB) - lpc32xx_eth_phylib_init(dev, 0); + lpc32xx_eth_phylib_init(dev, CONFIG_PHY_ADDR); #elif defined(CONFIG_MII) || defined(CONFIG_CMD_MII) miiphy_register(dev->name, mii_reg_read, mii_reg_write); #endif -- 2.1.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
