> >> __ft_board_setup() sets the property "ranges", with an entry for > >> every member of EBC_NUM_BANKS. > >> Then the so called "fixup" happens and the property > "ranges" is set > >> again, this time with only one entry (for the nor flash). > All other > >> entries are lost. > >> > > > > I see. I didn't spot this problem in the original patch. > Thanks for catching. > > > > It shouldn't be too hard to fix this problem by reading the > complete > > ranges array back and patching only the first entry and > re-writing ranges again. > > > > > I think my first patch that open-coded part of > ft_board_setup() related to EBC ranges was correct and tested > on real hardware. I admit that I didn't test the second > version of the patch, as I didn't have the hardware at hand. > > I'll submit a fix soon, but I still don't have hardware for > testing, so I'd appreciate your help with that.
Hmm, maybe something generic in fdt_support.c would be nice, like fdt_find_and_modify_prop(void *fdt, const char *node, const char *prop, const void *val, int len, int pos, int create) Cheers Dirk _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot