Add a debug UART implementation for this serial driver. It does not set up
pinmux automatically - this must be done before calling debug_uart_init().
Signed-off-by: Simon Glass <s...@chromium.org>
---
drivers/serial/Kconfig | 7 +++++++
drivers/serial/serial_s5p.c | 25 +++++++++++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 4829284..e51f915 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -44,6 +44,13 @@ config DEBUG_UART_NS16550
will need to provide parameters to make this work. The driver will
be available until the real driver model serial is running.
+config DEBUG_UART_S5P
+ bool "Samsung S5P"
+ help
+ Select this to enable a debug UART using the serial_s5p driver. You
+ will need to provide parameters to make this work. The driver will
+ be available until the real driver-model serial is running.
+
endchoice
config DEBUG_UART_BASE
diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 7abec53..4a553a3 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -200,3 +200,28 @@ U_BOOT_DRIVER(serial_s5p) = {
.ops = &s5p_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};
+
+#ifdef CONFIG_DEBUG_UART_S5P
+
+#include <debug_uart.h>
+
+void debug_uart_init(void)
+{
+ struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE;
+
+ s5p_serial_init(uart);
+ s5p_serial_baud(uart, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+ struct s5p_uart *uart = (struct s5p_uart *)CONFIG_DEBUG_UART_BASE;
+
+ while (readl(&uart->ufstat) & TX_FIFO_FULL);
+
+ writeb(ch, &uart->utxh);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
--
2.4.3.573.g4eafbef
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
