Hello Albert, On 06.07.2015 09:46, Albert ARIBAUD (3ADEV) wrote: > Hello Vladimir, > > On Mon, 6 Jul 2015 07:22:09 +0300, Vladimir Zapolskiy <v...@mleia.com> > wrote: >> This is an update to LPC32xx MAC driver, which needs to have small >> quirks in order to properly work with an external phy connected by >> RMII interface. >> >> RMII mode of MAC operation is selected, if CONFIG_RMII is defined, >> this option is aligned with a number of boards, which already have >> the same config value. >> >> Also hopefully the first change from the series speeds up auto >> negotiation due to corrected configuration of MAC on intialization. >> >> Tested with SMSC LAN8700 phy. >> >> Vladimir Zapolskiy (2): >> net: lpc32xx: improve MAC configuration on reset and initialization >> net: lpc32xx: add RMII phy mode support > > This series actually requires two other lpc32xx patches that you posted > earlier but which are not yet in u-boot/master or u-boot-arm/master: > > http://patchwork.ozlabs.org/patch/489100/ > http://patchwork.ozlabs.org/patch/489190/ > > In the future, please indicate when such a dependency is required, so > that testers know how to apply your patchs beforehand.
my fault, certainly will add such a note in future... > This point aside, I've tested the four patches above u-boot-arm/master > on a work_92105 target which has CONFIG_MII, and found no regression... > and a dramatic increase in TFTP throughput, so thanks. :) Thank you so much for testing MII, this is something I'm unable to do on my end. > (not adding my Tested-by because I don't want to mislead anyone: I > haven't tested RMII) > > Amicalement, > -- With best wishes, Vladimir _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot