Hi, On 13 July 2015 at 13:01, Otavio Salvador <ota...@ossystems.com.br> wrote: > Add thermal support so that we can see the following message on boot: > > CPU: Industrial temperature grade (-40C to 105C) at 33C > > Signed-off-by: Otavio Salvador <ota...@ossystems.com.br> > --- > > Changes in v2: None > > configs/cgtqmx6qeval_defconfig | 3 +++ > include/configs/cgtqmx6eval.h | 8 ++++++++ > 2 files changed, 11 insertions(+)
Reviewed-by: Simon Glass <s...@chromium.org> While you are in there, do you think you could fix the comments in thermal.h, which are mostly bogus? > > diff --git a/configs/cgtqmx6qeval_defconfig b/configs/cgtqmx6qeval_defconfig > index e1eb871..6fd29a0 100644 > --- a/configs/cgtqmx6qeval_defconfig > +++ b/configs/cgtqmx6qeval_defconfig > @@ -1,6 +1,9 @@ > CONFIG_ARM=y > CONFIG_TARGET_CGTQMX6EVAL=y > > CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/congatec/cgtqmx6eval/imximage.cfg,MX6Q" > +CONFIG_CMD_NET=y > +CONFIG_DM=y > +CONFIG_DM_THERMAL=y > # CONFIG_CMD_IMLS is not set > # CONFIG_CMD_FLASH is not set > # CONFIG_CMD_SETEXPR is not set > diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h > index 31ad366..f031940 100644 > --- a/include/configs/cgtqmx6eval.h > +++ b/include/configs/cgtqmx6eval.h > @@ -56,6 +56,14 @@ > #define CONFIG_PHYLIB > #define CONFIG_PHY_ATHEROS > > +/* Thermal support */ > +#define CONFIG_IMX6_THERMAL This could move to Kconfig. > + > +#define CONFIG_CMD_FUSE > +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) > +#define CONFIG_MXC_OCOTP > +#endif > + > #define CONFIG_DEFAULT_FDT_FILE "imx6q-congatec.dtb" > > #define CONFIG_EXTRA_ENV_SETTINGS \ > -- > 2.4.5 > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
