Currently during writing MP table I/O interrupt assignment entry, we
assume the PIRQ is directly mapped to I/O APIC INTPIN#16-23, which
however is not always the case on some platforms.
Signed-off-by: Bin Meng <bmeng...@gmail.com>
---
arch/x86/include/asm/mpspec.h | 17 +++++++++++++++++
arch/x86/lib/mpspec.c | 23 ++++++++++++++++-------
2 files changed, 33 insertions(+), 7 deletions(-)
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index efa9231..ad8eba9 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -432,6 +432,23 @@ void mp_write_compat_address_space(struct mp_config_table
*mc, int busid,
u32 mptable_finalize(struct mp_config_table *mc);
/**
+ * mp_determine_pci_dstirq() - Determine PCI device's int pin on the I/O APIC
+ *
+ * This determines a PCI device's interrupt pin number on the I/O APIC.
+ *
+ * This can be implemented by platform codes to handle specifal cases, which
+ * do not conform to the normal chipset/board design where PIRQ[A-H] are mapped
+ * directly to I/O APIC INTPIN#16-23.
+ *
+ * @bus: bus number of the pci device
+ * @dev: device number of the pci device
+ * @func: function number of the pci device
+ * @pirq: PIRQ number the PCI device's interrupt pin is routed to
+ * @return: interrupt pin number on the I/O APIC
+ */
+int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq);
+
+/**
* write_mp_table() - Write MP table
*
* This writes MP table at a given address.
diff --git a/arch/x86/lib/mpspec.c b/arch/x86/lib/mpspec.c
index f16fbcb..f90567c 100644
--- a/arch/x86/lib/mpspec.c
+++ b/arch/x86/lib/mpspec.c
@@ -269,6 +269,12 @@ static bool check_dup_entry(struct mpc_config_intsrc
*intsrc_base,
return (i == entry_num) ? false : true;
}
+__weak int mp_determine_pci_dstirq(int bus, int dev, int func, int pirq)
+{
+ /* PIRQ[A-H] are connected to I/O APIC INTPIN#16-23 */
+ return pirq + 16;
+}
+
static int mptable_add_intsrc(struct mp_config_table *mc,
int bus_isa, int apicid)
{
@@ -304,24 +310,27 @@ static int mptable_add_intsrc(struct mp_config_table *mc,
for (i = 0; i < count; i++) {
struct pirq_routing pr;
+ int bus, dev, func;
+ int dstirq;
pr.bdf = fdt_addr_to_cpu(cell[0]);
pr.pin = fdt_addr_to_cpu(cell[1]);
pr.pirq = fdt_addr_to_cpu(cell[2]);
+ bus = PCI_BUS(pr.bdf);
+ dev = PCI_DEV(pr.bdf);
+ func = PCI_FUNC(pr.bdf);
if (check_dup_entry(intsrc_base, intsrc_entries,
- PCI_BUS(pr.bdf), PCI_DEV(pr.bdf), pr.pin)) {
+ bus, dev, pr.pin)) {
debug("found entry for bus %d device %d INT%c,
skipping\n",
- PCI_BUS(pr.bdf), PCI_DEV(pr.bdf),
- 'A' + pr.pin - 1);
+ bus, dev, 'A' + pr.pin - 1);
cell += sizeof(struct pirq_routing) / sizeof(u32);
continue;
}
- /* PIRQ[A-H] are always connected to I/O APIC INTPIN#16-23 */
- mp_write_pci_intsrc(mc, MP_INT, PCI_BUS(pr.bdf),
- PCI_DEV(pr.bdf), pr.pin, apicid,
- pr.pirq + 16);
+ dstirq = mp_determine_pci_dstirq(bus, dev, func, pr.pirq);
+ mp_write_pci_intsrc(mc, MP_INT, bus, dev, pr.pin,
+ apicid, dstirq);
intsrc_entries++;
cell += sizeof(struct pirq_routing) / sizeof(u32);
}
--
1.8.2.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
