Dear Anton Vorontsov, In message <20090609202530.gc20...@oksana.dev.rtsoft.ru> you wrote: > This patch adds support for eSDHC on MPC837XERDB boards. The WP > switch doesn't seem to work on RDB boards though, the WP pin is > always asserted (can see the pin state when it's in GPIO mode). > > FSL DR USB and FSL eSDHC are mutually exclusive because of pins > multiplexing, so user should specify 'esdhc' or 'dr_usb' options > in the hwconfig environment variable to choose between the > devices. > > p.s. > Now we're very close to a monitor len limit (196 bytes left using > gcc-4.2.0), so also increase the monitor len by one sector (64 KB). > > Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com> > --- > board/freescale/mpc837xerdb/mpc837xerdb.c | 18 ++++++++++++++++++ > include/configs/MPC837XERDB.h | 18 +++++++++++++++++- > 2 files changed, 35 insertions(+), 1 deletions(-)
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "I didn't know it was impossible when I did it." _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot