Hi Minkyu, On 2 July 2015 at 18:15, Simon Glass <s...@chromium.org> wrote: > This series adds a number of fixes and improvements to driver model as > well as two new uclasses (video bridges and I2c muxes). > > The series is aimed at adding support for spring (HP 11 Chromebook). Since > it is very similar to other ARM Chromebooks, some effory is made to use > common code rather than duplicating functionality. In fact spring uses > the same code as several other boards, just with a different device tree > and a few configuration changes. > > Audio works correctly on pit, pi, spring and snow with this series. A bug > in the I2C driver broken this recently. > > The exynos implementation still has a few rough areas - e.g. some hard-coded > GPIOs and the old-style SPL. Also it does not yet support CPU frequency > scaling and power management. > > Spring has some oddities and they are hard to handle with U-Boot's old > way of doing drivers. With driver model these can be implemented cleanly > and this sort of problem was the original motivation for my interest in > driver model. > > This series is available at u-boot-dm in branch spring-working. It is > based on the previous set of driver model changes in branch clk-working.
Are you planning to pick this up or should I? It is still dependent on some driver model changes which I am working to apply. Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot