On Fri, 17 Jul 2015 14:35:39 -0500 Joe Hershberger <joe.hershber...@gmail.com> wrote:
> Hi Lukasz, > > On Thu, Jul 16, 2015 at 3:06 PM, Lukasz Majewski > <l.majew...@majess.pl> wrote: > > Hi Joe, > > > >> Hi Lukasz, > >> > >> On Sun, Jul 12, 2015 at 10:30 AM, Lukasz Majewski > >> <l.majew...@majess.pl> wrote: > >> > This commit adds initial support for using tftp for downloading > >> > and upgrading firmware on the device. > >> > > >> > Signed-off-by: Lukasz Majewski <l.majew...@majess.pl> > >> > --- > >> > drivers/dfu/Makefile | 1 + > >> > drivers/dfu/dfu_tftp.c | 76 > >> > ++++++++++++++++++++++++++++++++++++++++++++++++++ > >> > include/dfu.h | 11 ++++++++ 3 files changed, 88 > >> > insertions(+) create mode 100644 drivers/dfu/dfu_tftp.c > >> > > >> > diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile > >> > index 5cc535e..43249ce 100644 > >> > --- a/drivers/dfu/Makefile > >> > +++ b/drivers/dfu/Makefile > >> > @@ -10,3 +10,4 @@ obj-$(CONFIG_DFU_MMC) += dfu_mmc.o > >> > obj-$(CONFIG_DFU_NAND) += dfu_nand.o > >> > obj-$(CONFIG_DFU_RAM) += dfu_ram.o > >> > obj-$(CONFIG_DFU_SF) += dfu_sf.o > >> > +obj-$(CONFIG_DFU_TFTP) += dfu_tftp.o > >> > diff --git a/drivers/dfu/dfu_tftp.c b/drivers/dfu/dfu_tftp.c > >> > new file mode 100644 > >> > index 0000000..26539f2 > >> > --- /dev/null > >> > +++ b/drivers/dfu/dfu_tftp.c > >> > @@ -0,0 +1,76 @@ > >> > +/* > >> > + * (C) Copyright 2015 > >> > + * Lukasz Majewski <l.majew...@majess.pl> > >> > + * > >> > + * SPDX-License-Identifier: GPL-2.0+ > >> > + */ > >> > + > >> > +#include <common.h> > >> > +#include <malloc.h> > >> > +#include <errno.h> > >> > +#include <dfu.h> > >> > + > >> > +int dfu_tftp_write(char *dfu_entity_name, unsigned int addr, > >> > unsigned int len) +{ > >> > + char *s, *sb, *interface, *devstring; > >> > + int alt_setting_num, ret; > >> > + struct dfu_entity *dfu; > >> > + > >> > + debug("%s: name: %s addr: 0x%x len: %d\n", __func__, > >> > dfu_entity_name, > >> > + addr, len); > >> > + > >> > + interface = getenv("update_tftp_dfu_interface"); > >> > + if (interface == NULL) { > >> > + error("TFTP DFU: 'interface' not defined\n"); > >> > + return -EINVAL; > >> > + } > >> > + > >> > + devstring = getenv("update_tftp_dfu_devstring"); > >> > + if (devstring == NULL) { > >> > + error("TFTP DFU: 'devstring' not defined\n"); > >> > + return -EINVAL; > >> > + } > >> > >> It would be great if these env vars could be moved to command > >> parameters. > > > > Those parameters are necessary to perform update (via update_tftp()) > > during boot time. > > This is just the old method, right? Not the new DFU stuff. Yes, this is the part of legacy code. > > > Normally - when user call 'dfutftp' command he/she needs to specify > > this informaiton. (e.g. 'dfutftp 0 mmc 1'). > > Perfect - so specify it when you call it from preboot. I think that it would be feasible to use preboot variable for early booting. The problem is with CONFIG_UPDATE_TFTP flag. I will try to find solution for this issue. > > >> > + > >> > + ret = dfu_init_env_entities(interface, devstring); > >> > + if (ret) > >> > + goto done; > >> > + > >> > + /* > >> > + * We need to copy name pointed by *dfu_entity_name since > >> > this text > >> > + * is the integral part of the FDT image. > >> > + * Any implicit modification (i.e. done by strsep()) will > >> > corrupt > >> > + * the FDT image and prevent other images to be stored. > >> > + */ > >> > + s = strdup(dfu_entity_name); > >> > + sb = s; > >> > + if (!s) { > >> > + ret = -ENOMEM; > >> > + goto done; > >> > + } > >> > + > >> > + strsep(&s, "@"); > >> > + debug("%s: image name: %s strlen: %d\n", __func__, sb, > >> > strlen(sb)); + > >> > + alt_setting_num = dfu_get_alt(sb); > >> > + free(sb); > >> > + if (alt_setting_num < 0) { > >> > + error("Alt setting [%d] to write not found!", > >> > + alt_setting_num); > >> > + ret = -ENODEV; > >> > + goto done; > >> > + } > >> > + > >> > + dfu = dfu_get_entity(alt_setting_num); > >> > + if (!dfu) { > >> > + error("DFU entity for alt: %d not found!", > >> > alt_setting_num); > >> > + ret = -ENODEV; > >> > + goto done; > >> > + } > >> > + > >> > + ret = dfu_write_from_mem_addr(dfu, (void *)addr, len); > >> > + > >> > +done: > >> > + dfu_free_entities(); > >> > + > >> > + return ret; > >> > +} > >> > diff --git a/include/dfu.h b/include/dfu.h > >> > index 7d31abd..adad863 100644 > >> > --- a/include/dfu.h > >> > +++ b/include/dfu.h > >> > @@ -207,5 +207,16 @@ static inline int dfu_fill_entity_sf(struct > >> > dfu_entity *dfu, char *devstr, } > >> > #endif > >> > > >> > +#ifdef CONFIG_DFU_TFTP > >> > +int dfu_tftp_write(char *dfu_entity_name, unsigned int addr, > >> > unsigned int len); +#else > >> > +static inline int dfu_tftp_write(char *dfu_entity_name, unsigned > >> > int addr, > >> > + unsigned int len) > >> > +{ > >> > + puts("TFTP write support for DFU not available!\n"); > >> > + return -1; > >> > >> This should be -ENOSYS probably. > > > > Good point - thanks! > > > >> > >> > +} > >> > +#endif > >> > + > >> > int dfu_add(struct usb_configuration *c); > >> > #endif /* __DFU_ENTITY_H_ */ > >> > -- > >> > 2.1.4 > >> > > >> > _______________________________________________ > >> > U-Boot mailing list > >> > U-Boot@lists.denx.de > >> > http://lists.denx.de/mailman/listinfo/u-boot > > > > Best regards, > > Lukasz Majewski Best regards, Lukasz Majewski
pgpFPixcqrmEc.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot