On Tue, Jul 21, 2015 at 10:24 PM, Marek Vasut <ma...@denx.de> wrote: > On Wednesday, July 22, 2015 at 12:46:15 AM, Dinh Nguyen wrote: >> On 07/20/2015 02:40 PM, Marek Vasut wrote: >> > On Monday, July 20, 2015 at 09:31:39 PM, Dinh Nguyen wrote: >> > [...] >> > >> >>>>> Hi, >> >>>>> >> >>>>> yeah, I have some insane amount of cleanup patches and fixes already. >> >>>>> I will post them once I'm done. What I am sorely missing is the >> >>>>> UniPHY register interface documentation, it looks like that is not >> >>>>> public, so I don't exactly know if what sequencer.c does is really >> >>>>> correct. Sometimes I have serious doubts about that too . Can you >> >>>>> give me the documentation please ? >> >>>> >> >>>> Have you seen this link[1]? >> >>> >> >>> Yes, but that is by far not all of the registers used in the >> >>> sequencer.c, is it ? >> >> >> >> Looks like it's in the entire emi.pdf file[1]. Please look at volume 3, >> >> or page 531 of 895. The section for the UniPHY. >> > >> > I extracted all the possible addresses used in the sequencer while >> > cleaning it up, they're below. I cannot find these in any documentation. >> > I checked the EMI RM, sure, but there seems to be many more registers >> > all around the place than what are described in the EMI RM. Any ideas >> > please ? Maybe this is not even the UniPHY anymore ? > > Hi! > >> I'll try to get those questions answered for you shortly. > > Thanks! > >> BTW, I tested out our your branch, but I think I'm missing a step as >> where to put the SPL DTB? >> >> >> U-Boot SPL 2015.07-rc3-00100-ga2e2da6 (Jul 21 2015 - 17:15:54) >> drivers/ddr/altera/sequencer.c: Preparing to start memory calibration >> drivers/ddr/altera/sequencer.c: CALIBRATION PASSED >> drivers/ddr/altera/sequencer.c: Calibration complete >> Missing DTB >> ### ERROR ### Please RESET the board ### > > Do: > > make u-boot-with-spl-dtb.sfp >
Does your updated branch still work for you on the SoCKit? I'm hitting the dreaded "CALIBRATION FAILED" on all my boards here, the devkit, SoCKit and the new Atlas SoCKit. U-Boot SPL 2015.07-00293-ga6f4805 (Jul 23 2015 - 11:18:51) drivers/ddr/altera/sequencer.c: Preparing to start memory calibration drivers/ddr/altera/sequencer.c: CALIBRATION FAILED drivers/ddr/altera/sequencer.c: Calibration complete SDRAM calibration failed. ### ERROR ### Please RESET the board ### _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
