According to datasheet, SWBST_MODE starts from bit 2 and it occupies 2 bits.
So SWBST_MODE_MASK should be 0xC, and SWBST_MODE_xx should be ([mode] << 2).
Signed-off-by: Peng Fan <peng....@freescale.com>
Cc: Przemyslaw Marczak <p.marc...@samsung.com>
Cc: Stefano Babic <sba...@denx.de>
---
include/power/pfuze100_pmic.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index 57b9ca9..cb10605 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -193,11 +193,11 @@ enum {
#define SWBST_5_15V 3
#define SWBST_VOL_MASK 0x3
-#define SWBST_MODE_MASK 0x6
-#define SWBST_MODE_OFF (2 << 0)
-#define SWBST_MODE_PFM (2 << 1)
+#define SWBST_MODE_MASK 0xC
+#define SWBST_MODE_OFF (0 << 2)
+#define SWBST_MODE_PFM (1 << 2)
#define SWBST_MODE_AUTO (2 << 2)
-#define SWBST_MODE_APS (2 << 3)
+#define SWBST_MODE_APS (3 << 2)
/*
* Regulator Mode Control
--
1.8.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
