Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
Changes in v2: None
drivers/Makefile | 2 +-
drivers/ram/Kconfig | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/Makefile b/drivers/Makefile
index 8d4ac06..22d316e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
-obj-$(CONFIG_SPL_RAM_SUPPORT) += ram/
+obj-$(CONFIG_SPL_RAM) += ram/
obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
diff --git a/drivers/ram/Kconfig b/drivers/ram/Kconfig
index 642a2d8..ff09f22 100644
--- a/drivers/ram/Kconfig
+++ b/drivers/ram/Kconfig
@@ -8,7 +8,7 @@ config RAM
the RAM size can either be statically defined or dynamically
detected.
-config SPL_RAM_SUPPORT
+config SPL_RAM
bool "Enable RAM support in SPL"
depends on RAM
help
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
