Get rid of the constant clrsetbits_le32(), instead prepare the whole
content of the register once and write it at the end of the function.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
drivers/ddr/altera/sdram.c | 15 +++++++--------
1 file changed, 7 insertions(+), 8 deletions(-)
diff --git a/drivers/ddr/altera/sdram.c b/drivers/ddr/altera/sdram.c
index 143f41b..d8d04f4 100644
--- a/drivers/ddr/altera/sdram.c
+++ b/drivers/ddr/altera/sdram.c
@@ -393,15 +393,14 @@ static void set_sdr_addr_rw(void)
static void set_sdr_static_cfg(void)
{
- debug("Configuring STATICCFG\n");
- clrsetbits_le32(&sdr_ctrl->static_cfg, SDR_CTRLGRP_STATICCFG_MEMBL_MASK,
- CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL <<
- SDR_CTRLGRP_STATICCFG_MEMBL_LSB);
-
- clrsetbits_le32(&sdr_ctrl->static_cfg,
- SDR_CTRLGRP_STATICCFG_USEECCASDATA_MASK,
- CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA <<
+ const u32 static_cfg =
+ (CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL <<
+ SDR_CTRLGRP_STATICCFG_MEMBL_LSB) |
+ (CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA <<
SDR_CTRLGRP_STATICCFG_USEECCASDATA_LSB);
+
+ debug("Configuring STATICCFG\n");
+ writel(static_cfg, &sdr_ctrl->static_cfg);
}
static void set_sdr_fifo_cfg(void)
--
2.1.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
