The phy is using a RGMII interface, which we need to specify in our
board-config, and the dts needs a gmac section (the dts changes have
also been submitted to the kernel).
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
arch/arm/dts/sun6i-a31-colombus.dts | 12 ++++++++++++
configs/Colombus_defconfig | 2 +-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/sun6i-a31-colombus.dts
b/arch/arm/dts/sun6i-a31-colombus.dts
index 0cf9926..0d0b6f2 100644
--- a/arch/arm/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/dts/sun6i-a31-colombus.dts
@@ -66,6 +66,18 @@
status = "okay";
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index 1ae8c16..7fa9ef1 100644
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -7,7 +7,7 @@ CONFIG_USB1_VBUS_PIN=""
CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
--
2.4.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
