> -----Original Message----- > From: Jean-Christophe PLAGNIOL-VILLARD [mailto:plagn...@jcrosoft.com] > Sent: Sunday, July 19, 2009 2:56 AM > To: Prafulla Wadaskar > Cc: u-boot@lists.denx.de; Manas Saksena; Ronen Shitrit; > Nicolas Pitre; Ashish Karkare; Prabhanjan Sarnaik; Lennert Buijtenhek > Subject: Re: [U-Boot] [PATCH 3/3] Kirkwood: Sheevaplug: > kwimage configuration > > > + > > +# Boot Media configurations > > +BOOT_FROM nand > > +NAND_ECC_MODE default > > +NAND_PAGE_SIZE 0x0800 > > + > > +# SOC registers configuration for initial values using > bootrom header > > +extension # Maximum KWBIMAGE_MAX_CONFIG configurations allowed > > + > > +# Configure RGMII-0 interface pad voltage to 1.8V 0xFFD100e0 > > +0x1b1b1b9b # DRAM Configuration 0xFFD01400 0x43000c30 > could you give more details about the configs Dear Jean I will add details for each configuration
Regards.. Prafulla . . > > Best Regards, > J. > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot