Hi Bin,

On 08/09 10:52, Bin Meng wrote:
> Hi Andrew,
> 
> On Sun, Aug 9, 2015 at 9:08 AM, Andrew Bradford
> <and...@bradfordembedded.com> wrote:
> > Hi Simon,
> >
> > On 08/08 10:18, Simon Glass wrote:
> >> Hi,
> >>
> >> On 7 August 2015 at 06:44, Bin Meng <bmeng...@gmail.com> wrote:
> >> > On Fri, Aug 7, 2015 at 8:36 PM, Andrew Bradford
> >> > <and...@bradfordembedded.com> wrote:
> >> >> From: Andrew Bradford <andrew.bradf...@kodakalaris.com>
> >> >>
> >> >> Allow for configuration of FSP UPD from the device tree which will
> >> >> override any settings which the FSP was built with itself.
> >> >>
> >> >> Modify the MinnowMax and BayleyBay boards to transfer sensible UPD
> >> >> settings from the Intel FSPv4 Gold release to the respective dts files,
> >> >> with the condition that the memory-down parameters for MinnowMax are
> >> >> also used.
> >> >>
> >> >> Signed-off-by: Andrew Bradford <andrew.bradf...@kodakalaris.com>
> >> >> ---
> >> >>
> >> >
> >> > Reviewed-by: Bin Meng <bmeng...@gmail.com>
> >> > Tested-by: Bin Meng <bmeng...@gmail.com>
> >> >
> >>
> >> Acked-by: Simon Glass <s...@chromium.org>
> >> Tested on minnowmax:
> >> Tested-by: Simon Glass <s...@chromium.org>
> >>
> >> I found that I need to remove two properties from the minnowmax.dts:
> >>
> >> - fsp,enable-xhci needs to be removed as this does not work in U-Boot
> >> at present and stops EHCI from working
> >> - fsp,mrc-debug-msg needs to be removed to prevent debug information
> >> being displayed
> >>
> >> I plan to apply this with these changes - please let me know if this
> >> doesn't suit.
> >
> > I'm OK with disabling xhci and the MRC debug output in the FSP.
> >
> > But if xhci is disabled then I believe when Linux boots that the USB 3.0
> > port on Minnow Max will only act as a USB 2.0 port.  That u-boot doesn't
> > yet have working XHCI on E3800 means there is a tradeoff and I wasn't
> > sure which was a better choice.
> 
> Does these xHCI ports on MinnowMax work fully on Linux kernel? If it
> works, I'd rather we keep fsp,enable-xhci in the U-Boot.

I believe that the xhci port does work on Minnow Max in Linux but I do
not have a board so I'm unable to test, sorry.

Thanks,
Andrew
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to