On Sun, 2015-08-16 at 02:51 +0200, Marcel Ziswiler wrote: > On Wed, 2015-08-12 at 12:24 -0500, Andrew Ruder wrote: > > Just one nitty-gritty detail: > > > diff --git a/include/configs/colibri_pxa270.h > > b/include/configs/colibri_pxa270.h > > index e3f0ab0..e7db8cf 100644 > > --- a/include/configs/colibri_pxa270.h > > +++ b/include/configs/colibri_pxa270.h > > @@ -67,6 +67,7 @@ > > #define CONFIG_DM9000_BASE 0x08000000 > > #define DM9000_IO (CONFIG_DM9000_BASE) > > #define DM9000_DATA (CONFIG_DM9000_BASE + > > 4) > > +#define DM9000_HAS_SROM 1 > > Colibri PXA270 do not actually have any SROM so this should be > defined > to 0 instead. > > > #define CONFIG_NET_RETRY_COUNT 10 > > Otherwise for the whole series. > > Signed-off-by: Marcel Ziswiler <mar...@ziswiler.com>
This should of course have been an Acked-by, sorry. Will by you some Guinness in Dublin (;-p). > Tested-by: Marcel Ziswiler <mar...@ziswiler.com> > Tested-on: Colibri PXA270 V1.2C, V1.2D, V2.2B, V2.4A on Colibri > Evaluation Board V3.1A > Note: I only tested the one default on-module Ethernet instance and > while it all still works OK it feels like the transfer speed is > slightly lower (e.g. from the previous 1.3 MiB/s I now get 1.2 > MiB/s). _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
