This board has not been converted to generic board by the deadline. Remove it.
Signed-off-by: Simon Glass <s...@chromium.org> --- arch/arm/mach-kirkwood/Kconfig | 4 - board/Marvell/rd6281a/Kconfig | 12 --- board/Marvell/rd6281a/MAINTAINERS | 6 -- board/Marvell/rd6281a/Makefile | 9 --- board/Marvell/rd6281a/kwbimage.cfg | 151 ----------------------------------- board/Marvell/rd6281a/rd6281a.c | 157 ------------------------------------- board/Marvell/rd6281a/rd6281a.h | 25 ------ configs/rd6281a_defconfig | 6 -- include/configs/rd6281a.h | 96 ----------------------- 9 files changed, 466 deletions(-) delete mode 100644 board/Marvell/rd6281a/Kconfig delete mode 100644 board/Marvell/rd6281a/MAINTAINERS delete mode 100644 board/Marvell/rd6281a/Makefile delete mode 100644 board/Marvell/rd6281a/kwbimage.cfg delete mode 100644 board/Marvell/rd6281a/rd6281a.c delete mode 100644 board/Marvell/rd6281a/rd6281a.h delete mode 100644 configs/rd6281a_defconfig delete mode 100644 include/configs/rd6281a.h diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 9c6e398..27c09a7 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -4,9 +4,6 @@ choice prompt "Marvell Kirkwood board select" optional -config TARGET_RD6281A - bool "RD6281A Board" - config TARGET_DREAMPLUG bool "DreamPlug Board" @@ -51,7 +48,6 @@ endchoice config SYS_SOC default "kirkwood" -source "board/Marvell/rd6281a/Kconfig" source "board/Marvell/dreamplug/Kconfig" source "board/Marvell/guruplug/Kconfig" source "board/Marvell/sheevaplug/Kconfig" diff --git a/board/Marvell/rd6281a/Kconfig b/board/Marvell/rd6281a/Kconfig deleted file mode 100644 index 025ee26..0000000 --- a/board/Marvell/rd6281a/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_RD6281A - -config SYS_BOARD - default "rd6281a" - -config SYS_VENDOR - default "Marvell" - -config SYS_CONFIG_NAME - default "rd6281a" - -endif diff --git a/board/Marvell/rd6281a/MAINTAINERS b/board/Marvell/rd6281a/MAINTAINERS deleted file mode 100644 index d4ad592..0000000 --- a/board/Marvell/rd6281a/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -RD6281A BOARD -M: Prafulla Wadaskar <prafu...@marvell.com> -S: Maintained -F: board/Marvell/rd6281a/ -F: include/configs/rd6281a.h -F: configs/rd6281a_defconfig diff --git a/board/Marvell/rd6281a/Makefile b/board/Marvell/rd6281a/Makefile deleted file mode 100644 index cb77370..0000000 --- a/board/Marvell/rd6281a/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafu...@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := rd6281a.o diff --git a/board/Marvell/rd6281a/kwbimage.cfg b/board/Marvell/rd6281a/kwbimage.cfg deleted file mode 100644 index f969d92..0000000 --- a/board/Marvell/rd6281a/kwbimage.cfg +++ /dev/null @@ -1,151 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafu...@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x37543000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x00000099 # DDR Address Control -# bit1-0: 00, Cs0width=x8 -# bit3-2: 11, Cs0size=1Gb -# bit5-4: 00, Cs1width=x8 -# bit7-6: 11, Cs1size=1Gb -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000C52 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000004 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 1, DDR ODT control lsd (disabled) -# bit5-3: 000, required -# bit6: 0, DDR ODT control msb, (disabled) -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb -DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low) -# bit3-0: 2, ODT0Rd, MODT[0] asserted during read from DRAM CS1 -# bit7-4: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0 -# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1 -# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0 - -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000E40F # CPU ODT Control -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/Marvell/rd6281a/rd6281a.c b/board/Marvell/rd6281a/rd6281a.c deleted file mode 100644 index b0020c9..0000000 --- a/board/Marvell/rd6281a/rd6281a.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafu...@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <miiphy.h> -#include <netdev.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include "rd6281a.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - mvebu_config_gpio(RD6281A_OE_VAL_LOW, - RD6281A_OE_VAL_HIGH, - RD6281A_OE_LOW, RD6281A_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GE1_0, - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, - MPP34_GE1_14, - MPP35_GPIO, - MPP36_AUDIO_SPDIFI, - MPP37_AUDIO_SPDIFO, - MPP38_GPIO, - MPP39_TDM_SPI_CS0, - MPP40_TDM_SPI_SCK, - MPP41_TDM_SPI_MISO, - MPP42_TDM_SPI_MOSI, - MPP43_TDM_CODEC_INTn, - MPP44_GPIO, - MPP45_TDM_PCLK, - MPP46_TDM_FS, - MPP47_TDM_DRX, - MPP48_TDM_DTX, - MPP49_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config, NULL); - return 0; -} - -int board_init(void) -{ - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_RD88F6281; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -void mv_phy_88e1116_init(char *name) -{ - u16 reg; - u16 devadr; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __FUNCTION__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - if (miiphy_read (name, devadr, MII_BMCR, ®) != 0) { - printf("Err..(%s) PHY status read failed\n", __FUNCTION__); - return; - } - if (miiphy_write (name, devadr, MII_BMCR, reg | 0x8000) != 0) { - printf("Err..(%s) PHY reset failed\n", __FUNCTION__); - return; - } - - printf("88E1116 Initialized on %s\n", name); -} - -/* Configure and enable Switch and PHY */ -void reset_phy(void) -{ - /* configure and initialize switch */ - struct mv88e61xx_config swcfg = { - .name = "egiga0", - .vlancfg = MV88E61XX_VLANCFG_ROUTER, - .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, - .led_init = MV88E61XX_LED_INIT_EN, - .portstate = MV88E61XX_PORTSTT_FORWARDING, - .cpuport = (1 << 5), - .ports_enabled = 0x3f, - }; - - mv88e61xx_switch_initialize(&swcfg); - - /* configure and initialize PHY */ - mv_phy_88e1116_init("egiga1"); -} diff --git a/board/Marvell/rd6281a/rd6281a.h b/board/Marvell/rd6281a/rd6281a.h deleted file mode 100644 index 5e1f6a8..0000000 --- a/board/Marvell/rd6281a/rd6281a.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafu...@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __RD6281A_H -#define __RD6281A_H - -#define RD6281A_OE_LOW (~(1 << 7)) -#define RD6281A_OE_HIGH (~(1 << 2 | 1 << 12)) -#define RD6281A_OE_VAL_LOW (0) -#define RD6281A_OE_VAL_HIGH (1 << 12) - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -#endif /* __RD6281A_H */ diff --git a/configs/rd6281a_defconfig b/configs/rd6281a_defconfig deleted file mode 100644 index 8fe8594..0000000 --- a/configs/rd6281a_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_RD6281A=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h deleted file mode 100644 index a0120b0..0000000 --- a/include/configs/rd6281a.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Written-by: Prafulla Wadaskar <prafu...@marvell.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_RD6281A_H -#define _CONFIG_RD6281A_H - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nMarvell-RD6281A" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_MACH_RD6281A /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_FAT -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB -#define CONFIG_CMD_IDE - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ -#else -#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ -#endif -/* - * max 4k env size is enough, but in case of nand - * it has to be rounded to sector size - */ -#define CONFIG_ENV_SIZE 0x20000 /* 128k */ -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_OFFSET 0x40000 /* env starts here */ - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" - -#define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \ - "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0" - -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \ - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \ - "x_bootcmd_usb=usb start\0" \ - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0" - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */ -#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE -#define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */ -#define CONFIG_PHY_SPEED _1000BASET /*Force PHYspeed to 1GBPs */ -#define CONFIG_PHY_BASE_ADR 0x0A -#define CONFIG_MV88E61XX_SWITCH /* Enable MV88E61XX switch driver */ -#endif /* CONFIG_CMD_NET */ - -/* - * SATA Driver configuration - */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /*CONFIG_MVSATA_IDE*/ - -#endif /* _CONFIG_RD6281A_H */ -- 2.5.0.457.gab17608 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot