On Tuesday, September 01, 2015 at 05:12:40 PM, Dinh Nguyen wrote: > On 09/01/2015 03:33 AM, Marek Vasut wrote: > > On Tuesday, September 01, 2015 at 09:38:23 AM, Pavel Machek wrote: > >> On Tue 2015-09-01 00:23:49, Marek Vasut wrote: > >>> On Monday, August 31, 2015 at 09:57:05 PM, > >>> dingu...@opensource.altera.com > > > > wrote: > >>>> From: Dinh Nguyen <dingu...@opensource.altera.com> > >>>> > >>>> Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a > >>>> CycloneV based board. The board can boot from SD/MMC. Ethernet is a > >>>> bit different because it has a KSZ9031 PHY, so for now, ethernet > >>>> doesn't quite work yet, as a few patches are needed to support the > >>>> PHY. > >>> > >>> I thought we did support the KSZ9031 PHY. What's the problem ? > >>> > >>>> Signed-off-by: Dinh Nguyen <dingu...@opensource.altera.com> > >>>> --- > >>>> Hi Marek, > >>>> > >>>> This patch is based on your u-boot-socfpga/wip/boards branch. > >>> > >>> OK, that makes sense. > >>> > >>>> Thanks, > >>>> Dinh > >>>> --- > >>>> > >>>> arch/arm/dts/Makefile | 1 + > >>>> arch/arm/dts/socfpga_cyclone5_de0_sockit.dts | 61 +++ > >>>> arch/arm/mach-socfpga/Kconfig | 7 + > >>>> board/terasic/de0/MAINTAINERS | 5 + > >>>> board/terasic/de0/Makefile | 9 + > >>> > >>> I think it might be clearer to rename it to de0-nano-soc, what do you > >>> think ? What's the difference between de0-nano-soc and atlas btw ? > >> > >> Unless they are going to make "de0-mega".. I'd say "de0" is clean > >> enough. > > > > They already make de0-cv , which is cycloneV SoC based, so de0 is not > > clear enough, no way. They also make de0-nano , which is cycloneIV based > > (without soc). > > After looking around the site a bit more, I think "de0_nano_sockit" is > more appropriate?
It's de0-nano-soc, that's what they call it on that website, right ? SoCkit is a separate board. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot