Hi Markus, On 23/09/2015 10:02, Markus Stelzhammer wrote: > Hi all, > > > I'm currently working on the port of u-boot for our custom boards. > Previously we were using u-boot based on v2013.04 without SPL for our > boards (we have boards with SD also) and this worked for all of our > devices. > > As we now have new boards with different (bigger) RAM, I decided to use > the newest bootloader (v2015.10) and enable SPL support. > This is already working on a board with SD-Card but I'm not getting it > to work on the boards with NAND. > > When I try to boot, SPL is detecting and loading u-boot but u-boot > throws a "data abort" during "ubifs mount".
u-boot ist also in NAND ? Then SPL has configured correctly the device else u-boot was not loaded. > The strange thing for me is that when I disable SPL, the board will boot > properly. You can try to follow the data abort and check which addresses are involved. We cannot underestimate that the bug is still present in u-boot, but it appears only together with SPL. > > Could anyone give me a hint how I could trace this error? > I can also provide logs or code snippets if needed! Some initialization done previously in u-boot, is done now by SPL - check your code if there is something missing. As your board is not mainlined, we cannot help a much with code. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot