Set missing boot address in bootm command. This fixes the error:
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Reported-by: Uwe Scheffler <scheffle...@web.de>
Signed-off-by: Soeren Moch <sm...@web.de>
Tested-by: Uwe Scheffler <scheffle...@web.de>
---
Cc: Stefano Babic <sba...@denx.de>
Cc: Uwe Scheffler <scheffle...@web.de>
---
include/configs/tbs2910.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 66cb274..5943104 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -190,7 +190,7 @@
"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
"rdinit=/sbin/init enable_wait_mode=off\0" \
"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
- "mmc read 0x10800000 0x800 0x4000; bootm\0" \
+ "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
"run bootargs_upd; " \
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
