Hi,
On 02-10-15 10:49, Chen-Yu Tsai wrote:
On Fri, Sep 25, 2015 at 4:06 PM, Hans de Goede <hdego...@redhat.com> wrote:
Hi,
On 25-09-15 04:35, Chen-Yu Tsai wrote:
On Thu, Sep 24, 2015 at 11:24 PM, Hans de Goede <hdego...@redhat.com>
wrote:
<snip>
diff --git a/configs/q8_a33_tablet_800x480_defconfig
b/configs/q8_a33_tablet_800x480_defconfig
new file mode 100644
index 0000000..a9c2b62
--- /dev/null
+++ b/configs/q8_a33_tablet_800x480_defconfig
@@ -0,0 +1,24 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A33=y
+CONFIG_DRAM_CLK=456
+CONFIG_DRAM_ZQ=15291
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
FYI my q8h-v1.5 uses a slightly different mode line:
x:800,y:480,depth:18,pclk_khz:36000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0
Yes, there are multiple modelines floating around for 800x480 panels, I've
2 A13 tablets and the modeline of the fex file from tablet a causes the
images
to not be properly centered on the screen of tablet b. Luckily the other way
around does work, so for the q8_a13_tablet_defconfig I'm using the modeline
from the fex file from tablet b. I hope we can do something similar with q8
a23 and a33 800x480 tablets.
I've been buying q8 tablets with cracked screens (people seem to drop them
quite
a lot) for cheap from a local 2nd hand website, so now I've 5 ever so
slightly
different models, I still need to make a generic q8 config for those, and
see if
I can find a modeline which works on all of them.
That modeline should probably be a good one to use for the a33 defconfig
too.
I'll find some time to give yours a test.
So it looks like your modeline works as well. I can't see any difference
between the two on screen.
Great, thanks for testing this.
Speaking of the screen, mine is slightly off
vertically. Feels like it is 1 line lower than it should be. And the right
most end displays partially under the touchscreen with either modeline.
Yeah I've this with some other q8 tablets too, where the black bezel of the
touchscreen slightly overlaps part of the lcd which should be visible, I guess
this can be expected given the prices of these tablets.
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
